Operating instructions

ENGLISH en
7
Use only genuine Metabo accessories.
For a complete range of accessories, see
www.metabo.com or the main catalogue.
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
If the mains connection cable of this machine is
damaged, it must be replaced by the manufacturer
or an authorized service centre to avoid hazard.
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
D = Diameter of support plate
P
1
= Nominal power input
P
2
= Power output
n
0
= Idle speed (setting wheel)
n
0, TB
= Idle speed (TurboBoost switch)
n
1, TB
= Speed at rated load (TurboBoost
switch)
s
0
= Oscillating frequency at idle speed
(setting wheel)
s
0, TB
= Oscillating frequency at idle speed
(TurboBoost switch)
s
1, TB
= Oscillating frequency at rated load
(TurboBoost switch)
S = Oscillating circuit diameter
m = Weight without mains cable
Wear ear protectors!
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
9. Accessories
10. Repairs
11. Environmental Protection
12. Technical Specifications