User Manual
ENGLISH
24
1. Scope of delivery ...................22
2. Machine overview .................. 23
3. Please Read First!..................24
4. Safety Instructions ................ 24
4.1 Specified conditions of use ...... 24
4.2 General Safety Instructions ..... 24
4.3 Symbols on the machine ......... 26
4.4 Safety devices ......................... 26
5. Special Product Features...... 27
6. Operating elements ............... 27
7. Assembly................................ 28
7.1 Mains connection.....................32
7.2 Set-up ......................................32
8. Operation................................ 32
8.1 Dust collector ........................... 33
8.2 Adjusting the cutting depth ...... 33
8.3 Setting the saw blade tilt.......... 34
8.4 Sawing with the rip fence......... 34
8.5 Sawing with the mitre fence..... 34
9. Tips and Tricks ...................... 35
10. Care and Maintenance........... 35
10.1 Changing the saw blade .......... 35
10.2 Aligning the riving knife............ 36
10.3 Cleaning the saw blade's
height adjustment mechanism . 36
10.4 Storing the saw ........................ 37
10.5 Maintenance ............................ 37
11. Repairs.................................... 37
12. Transport ................................ 37
13. Available Accessories........... 37
14. Environmental
Considerations....................... 37
15. Troubleshooting .................... 37
16. Technical Data ....................... 38
These instruction have been written in
a way which facilitates learning of how
to safely operate your saw. Here is a
guide on how you should read these in-
structions:
– Read these instructions before use.
Pay special attention to the safety
information.
– These instructions are intended for
persons with basic technical know-
ledge regarding the operation of a
device like the one described her-
ein. Inexperienced persons are
strongly advised to seek competent
advise and guidance from an expe-
rienced person before operating this
machine.
– Keep all documents supplied with
this machine for future reference.
Retain proof of purchase in case of
warranty claims.
– This device must not be sold or lent
to someone else without being ac-
companied by these Operating In-
structions and all other documents
supplied with the device.
– The equipment manufacturer is not
liable for any damage resulting from
neglect of these operating instruc-
tions.
Information in these instructions is desi-
gnated as under:
ADanger!
Risk of personal injury or environmental
damage.
BRisk of electric shock!
Risk of personal injury by electric
shock.
cDrawing-in/trapping hazard!
Risk of personal injury by body parts or
clothing being drawn into the rotating
saw blade.
A Caution!
Risk of material damage.
3 Note:
Additional information.
– Numbers in illustrations (1, 2, 3
etc.)
– denote component parts;
– are consecutively numbered;
– relate to the corresponding num-
ber(s) in brackets (1), (2), (3) etc.
in the neighbouring text.
– Numbered steps must be carried
out in sequence.
– Instructions which can be carried
out in any order are indicated by a
bullet point (•).
– Listings are marked by a dash (–).
4.1 Specified conditions of
use
This machine is intended for ripping,
cross-cutting and cutting to size of solid
wood, particle board, fibreboard, ply-
wood and these materials provided
they have plastic laminate surfaces or
edge trim or are veneered.
Round workpieces may not be sawed
as they can be twisted by the rotating
saw blade.
The tool must not be used for grooving.
Always have blade guard installed du-
ring operation.
Any other use is considered to be not
as specified and not permitted. The ma-
nufacturer is not liable for any damage
caused by unspecified use.
Reconstruction of this machine or use
of parts that have not been tested and
released by the manufacturer can lead
to unforeseen damage and dangers du-
ring operation.
4.2 General Safety Instruc-
tions
When using this machine observe
the following safety instructions to
minimise the risk of personal injury
or material damage.
Please also observe the special sa-
fety instructions in the respective
sections.
Where applicable, follow the legal
directives or regulations for the pre-
vention of accidents pertaining to
the use of circular saws.
AGeneral hazards!
Keep your work area tidy – a messy
work area invites accidents.
Be alert. Know what you are doing.
Set out to work with reason. Do not
operate device while under the influ-
ence of drugs, alcohol or medicati-
on.
Consider environmental conditions.
Keep work area well lighted.
Avoid unnatural body positions.
Ensure firm footing and keep your
balance at all times.
Use suitable workpiece supports
when cutting long stock.
Table of Contents
3. Please Read First!
4. Safety Instructions