Operation Manual

ENGLISH
28
The switch buttons must point to the
right-hand side.
A Caution!
Make sure the cable does not run
over sharp edges and is not bent.
Installing the alternative ON/OFF switch
x Install as detailed above.
The switch buttons, however, must
point to the front (towards the ope-
rator).
Installing the dust collection gear
1. Raise saw blade fully.
2. Install blade guard (82) on riving
knife (83).
3 Note:
The blade guard is tilted slightly down-
ward on the operator side after installa-
tion on the riving knife.
3. Push one end of the suction hose
(85) on the blade guard's suction
port (84).
4. Fit other end of the suction hose to
the dust extraction port (86) on the
chipcase.
5. Installing the hose carrier (88):
– Put two hexagon head screws
(89) from the outside through the
hose carrier and leg;
– from the inside screw on flange
nuts (87) – do not yet tighten ful-
ly.
6. Align hose carrier, tighten hexagon
head screws and flange nuts. Hook
the suction hose into the hose carri-
er (88).
7. Connect the saw's dust extraction
port at the chipcase to a suitable
dust collector (see 'Dust collector' in
chapter 'Operation').
Mitre fence assembly
1. Attaching the front mounting bracket
(94) to the left-hand front side of the
saw:
– remove the hexagon head
screws (93) from the left-hand
front and rear side of the table
panel.
– put two each hexagon head
screws (93) fitted from the out-
side through the mounting brak-
ket (94) and the table panel;
Item Description Qty.
80 Hexagon head screw
M6 x 16
2
81 Flange nut M6 2
Item Description Qty.
82
Blade guard 1
85
Suction hose 1
87
Flange nut M8 2
88
Hose carrier 1
89
Hexagon head screw 
M8 x 16 2
80
81
8283
84 85
86
Item Description Qty.
90 Guide bar 1
91 Fence carrier, lower 1
92 Flange nut M8 
( ) = already installed
3
(3)
93 Hexagon head screw
M8 x 20
( ) = already installed
3
(3)
94
95
Mounting bracket 2
96 Plug 2
97 Bracket for table
extension
2
99 Star-knob screw M8 1
100 Washer 8.4 1
101 Fence carrier, upper 1
102 Fence extrusion,
short
1
87
88
89