Specifications
12
ENGLISH
For shielded gas welding it must be
ensured that the shielding gas cover is
not blown away by air draft.
For machine performance see "Techni-
cal Specifications".
Any other use is not as specified and
prohibited.
The manufacturer does not assume any
liability for damage caused by unspeci-
fied use.
2.2 Symbols Used
Danger!
Disregard of the following
warnings could cause
serious personal injury or
material damage.
Read operating instruc-
tions before initial opera-
tion
2-step mode
4-step mode
Spot welding
Gasless and currentless
wire thread-up
Wire feed speed
Welding current coarse set-
ting (voltage)
Welding current fine setting
(voltage)
Supply voltage
Welding machine suitable
for welding in environ-
ments with an increased
electrical hazard.
Excess temperature
Information on the name plate:
3.1 Control Panel
3.2 MIG/MAG 150/20 XT
3.3 MIG/MAG 170/30 XTC
2
345
7
8
1
6
1 Manufacturer
2 Machine designation
3 Serial number
4 Standard information – This
machine meets the requirements
of the standards mentioned
5 CE mark – This machine con-
forms to EC directives as per
declaration of conformity
6 Waste disposal symbol – the
machine can be disposed of
through the manufacturer
7 Electrical performance data
8 Date of manufacture
3. Operating Elements
9 Operating mode selector
switch
To set the operating mode.
10 LED overload (yellow)
Indicates overloads.
11 LED power (green)
Indicates the welding
machine's readiness for opera-
tion.
12 Wire feed setting knob
For setting the wire feed speed.
Setting range: approx. 0 to 20
m/min
(On the MIG/MAG 150/20 XT
the wire feed speed depends
on the set welding step as
well).
13 Weld time setting knob
For setting the weld time in
spot weld mode.
Setting range: approx. 0 to 15 s
9101112
13
14 Welding gun
(not detachable)
15 Earth cable (cross
section = 16 mm
2
)
16 Main switch
Position I: machine turned ON
Position 0: machine turned
OFF
17 Welding step selector switch
Switches the welding current
(voltage) in six steps.
18 Connector for welding gun
Accepts all commercially avail-
able welding guns (Euro con-
nector KZ-2).
15
14
16
17
19
18
20
21
22
23