WELDING TECHNOLOGY COMPACT PRECISION TECHNOLOGY. Our engineers know what they are doing when it comes to top class welding equipment. They keep in close contact with those who know best what good welding equipment is all about: the craftspeople. That is why a Metabo welding device has everything you need. That is a promise, because in addition to designing our welding equipment from start to finish, we also produce and assemble it - from the transformer to the entire electronics.
WELDING TECHNOLOGY | 323
WELDING TECHNOLOGY ALWAYS THE RIGHT TORCH. Electrode welding, TIG welding, MIG/MAG welding – engineering department is always looking for the latest Metabo has the right welding unit for all materials and technology to enable our customers in craft and industry for every thickness. However, that is not enough: Our to work even more quickly, more rationally and more ef- An overview of welding types. Stick electrode Casing Core rod Gas/slag Electric arc Electrode welding.
ficiently. Example: The innovative sinus inverter techno- “Smart Intelligence” – with state-of-the-art electronics logy by Metabo. High welding output but low fuel con- for ideal welding results. SAWS WELDING TECHNOLOGY Which welding device is suitable for which material? Electrode welding Device type Max.
WELDING GLOSSARY Welding technology from A to Z. AC Abbreviation for Alternating Current. Electrode and TIG welding can be carried out with direct current and alternating current. TIG aluminium welding must be carried out with alternating current. DIODE Electronic component (semi-conductor). Converts alternating current into direct current one-way by a blocking effect. INDUCTION COIL A coil wound with copper wire. Acts like an energy buffer and helps to optimise the welding current. Also see choke.
MIXED LIGHT ARC A transition light arc that lies between short and long light arcs. The drop transitions take place partly in the short circuit (see long arc). Specification for the protection of a device from water (rain) and dirt. (e.g. IP 23: 2 = protection against foreign matter ≥ Ø 12.5 mm, 3 = protection against splashes of water) SECONDARY TIMING Inverter principle. The mains frequency is boosted by an electronic unit behind the transformer. VOLTAGE PFC Power Factor Control.
ELECTRODE WELDING SYSTEMS THEY LIKE TO PLAY WITH FIRE. As if made for tough construction site applications: sturdy used outdoors in difficult conditions. Wind? No problem! design and easy to operate. Electrode welding devices are By the time you get to the latest TIG function capability real all-rounders. From roughly 1.5 mm on, they can weld you will be full of enthusiasm for an electrode welding almost anything that can be welded. They can even be system that has absolutely earned the name Metabo.
ELECTRODE WELDING SYSTEMS E 130 SAWS SPECIAL-PURPOSE MACHINES SYSTEMATIC ORGANISATION E 130 Set High duty cycle due to additional fan function Robust metal housing Housing with protection class IP 23C for safe, rough construction site application "Multi-function shoulder strap": for light and practical device transport Removable welding and earth cable "S-mark": approved for welding even in narrow welding spaces with increased electrical danger CE-inspected E 150 Set E 150 E 170 Si Electrode Welding
ELECTRODE WELDING SYSTEMS COMMON FEATURES Large control elements for optimum adjustment even with gloves Welding current display Copper coil with heat protection for long service life Operation at 230 V and 400 V Impact-resistant, fully insulated plastic housing Removable welding and earth cable 5 year warranty on main transformer CE-inspected ....
ELECTRODE WELDING SYSTEMS SPECIAL-PURPOSE MACHINES SAWS COMMON FEATURES Large control elements for optimum adjustment even with gloves Copper coil with heat protection for long service life Robust metal housing 5 year warranty on main transformer CE-inspected SB 200 CT Electrode Welding System SB 140 Electrode Welding System SB 200 CT 230 V 35 - 140 A 230/400 V 20 - 110 A 60 - 180 A 4,2/10,2 kVA 15 %/10 % 10 %/7 % 65 A 45 A 4 mm 2,5 - 5 mm T 16 A T 20 A 470 x 280 x 320 mm 23,5 kg 3,8 kVA 3,25 mm 2
ACCESSORIES FOR ELECTRODE WELDING SYSTEMS FOR E 130, E 150, E 170 SI Torch caps Tungsten electrodes See page 347 Version Suitable for Order no. Long Short SR 17/18/26 SR 17/18/26 1327127230 1327127248 TIG welding torches Accessory box Order no. Torch type Length m Suitable for Order no.
ACCESSORIES FOR ELECTRODE WELDING SYSTEMS Order no. 1327628760 200 Rod holder 200 1327022381 Cable diameter mm² 25 Order no. 3 SK 200 0902008365 E 200 DCI, SK 200 0902007180 3 Order no. FOR SB 230, SB 260, SK 230, SK 260 0902027467 0902027440 Length Suitable for m Order no. Earth cable 25 3 16 3 Electrode cable E 170 Si, E 130, E 150 0902008365 1002004999 35 E 170 Si 0902007180 3 Welding site equipment no.
