Product Overview

10. LIMITED WARRANTY
RectorSeal, LLC makes the Limited Express Warranty that when the instructions for storage and handling of our products are followed we warrant our products to be free from defects. THIS LIMITED
EXPRESS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE, AND OF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL, LLC. The sole remedy for breach of the Limited Express Warranty shall be the refund of the purchase
price. All other liability is negated and disclaimed, and RectorSeal, LLC shall not be liable for incidental or consequential damages.
Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as to the methods and conditions
of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.
R50101 1217
METACAULK
®
1200
METACAULK
®
1200 COVERAGE RATE:
NOTE: Coverage rates as given are mathemati-
cal calculations. Allow for application
losses, opening size variations and
applied thickness variations. (Verify all
calculations)
Based on 3" fluted metal deck with 3/4" relief joint.
* Calculation includes 1/2" overlap along both edges of
opening
Opening
Width
(inches)
*Coverage Rate in Lineal Feet
Per Gallon at Application Thick-
ness of:
1/8 inch
1/2 102
3/4 88
1 77
1 1/2 61
2 51
2 1/2 44
3 38
3 1/2 34
4 30
5 25
6 22
5. Testing Data
Metacaulk
®
1200 has been listed by UL. For
UL classied system numbers, see above.
Additional listings can be obtained by calling
RECTORSEAL. For specic test criteria,
refer to the UL Fire Resistence Directory or
call RECTORSEAL.
Metacaulk
®
1200 was tested at positive
pressure with a minimum 0.01 inches (2.5
Pa) water and in accordance with UL 2079
test standards.
FBC System Compatible* indicates that this product has been
tested, and is monitored on an ongoing basis, to assure its chemi-
cal compatibility with FlowGuard Gold®, BlazeMaster® and
Corzan® pipe and ttings.
FBC, FlowGuard Gold®, BlazeMaster® and Corzan® are
licensed trademarks of the Lubrizol Corporation.
For additional information, refer to Safety Data Sheet.
For additional technical service,
call: 713-263-8001 or 1-800-231-3345
fax: [phone] or 1-800-452-2824
RECTORSEAL
2601 SPENWICK DRIVE HOUSTON, TEXAS 77055
WWW.RECTORSEAL.COM
WWW.METACAULK.COM
6. Storage & Handling
Metacaulk
®
1200 should be stored in
unopened container between 35˚(2˚C) and
120˚F (49˚C) to obtain a minimum 3 year
shelf life. NOTE: Do not dilute; no mixing
is required. Best if protected from freezing.
If freezing occurs, thaw completely before
use. Keep products stored under protective
cover in original containers.
7. Availability
Metacaulk
®
1200 is available in 5 gallon
pails, 30 oz tube, quart bottles, and 20.2 oz
sausage packs.
8. Limitations
Metacaulk
®
1200 is not designed to be used
in areas under continuous immersion or in
areas which would be continuously wet.
Metacaulk
®
1200 should not be used on hot
uninsulated surfaces above 200˚F (93˚C).
Self Leveling (SL) can not be used on vertical
applications.
9. Cautions
FOR CHEMICAL EMERGENCY, SPILL,
LEAK, FIRES, EXPOSURE OR ACCIDENT,
CALL CHEMTREC - DAY OR NIGHT
1-800-424-9300.
PRECAUTIONS: Do not take internally. May
be harmful if swallowed. May cause eye and skin
irritation. Wear gloves and safety glasses. Wash
after handling. FIRST AID: For any overexposure
or if skin irritation develops get immediate medical
attention. Eyes - Flush 15 minutes with clean
water. Skin - Wash with soap and water. Ingestion
- Call physician immediately SPILLS: Clean up
immediately with scrapers and water. STORAGE
AND HANDLING: Keep container upright and
tightly closed. Do not reuse empty container. KEEP
OUT OF REACH OF CHILDREN.
NOTE: SPRAY EQUIPMENT CAN BE
DANGEROUS! USE ONLY PROPERLY
TRAINED PERSONNEL. FOLLOW
ALL SAFETY AND OPERATION
INSTRUCTIONS AND PROCEDURES.
Spray application of Metacaulk 1200
Spray requires airless spray equipment
meeting the following specications:
Working Pressure: Min. 2500 PSI (172 Bar)
Delivery: Min. .72 U.S. gpm (2.7 l/min.)
Recommended Spray Tip Orice: 0.021
to 0.025 (0.53 to 0.64 mm)
Recommended Wetted Parts All seals and
contact surfaces suitable for contact with
latex emulsions.
A minimum 3/8˝ (9.5 mm) uid line is
required, a 1/2˝ (13 mm) line is preferred.
Consult pump manufacturer for long
hose runs or lifts to higher elevations.
A reversible spray tip is recommended.
A 6˝ (152 mm) fan pattern is suggested
to minimize overspray. The following
airless spray equipment has demonstrated
suitability for application of this product.
Manufacturer Model Number &
Description
Titan Tool Inc. 740ix Electric Airless
Sprayer
Graco Inc. Ultra Max II 695 Electric
Airless Sprayer