Product Brochure

SPECIFICATIONS DESCRIPTION
The Metal Man Inverter Powered 200iDV AC/DC TIG is a
dual voltage, inverter powered AC and DC TIG, Pulse
TIG and DC Stick welder. This unit is intended to be
used on a 50 amp 230V AC circuit or 120V, 20A AC Cir-
cuit, without the use of an extension cord. This machine
comes complete with a TIG Torch, a Foot Pedal, regula-
tor/flow gauge with an inert gas hose, a ground cable
and clamp, and an Electrode Holder with cable.
The 200iDV AC/DC TIG is the ideal Stick and TIG welder
for every shop. The DC stick mode allows you to stick
weld when your application requires it. In the DC TIG
mode you are able to TIG weld metals such as steel and
stainless steel. In the AC TIG mode, you are able to TIG
weld non-ferrous metals such as Aluminum. This unit is
equipped with advanced TIG capabilities including
Pulse, AC Arc Frequency Control, AC Arc Balance Con-
trol, and Auto Balance/Frequency Control.
Order Part Number: MM200iDVACDC
Inver ter Power ed 200iDV AC/DC TIG
www.MetalManGear.com
Ground Cable
and Clamp
Electrode Holder
And Weld Cable
Regulator/
Flow gauge
With Gas Hose
Easy To Set
Front Panel with
Weld Parameter
Setting Indicators
Remote Foot
Pedal Control
TIG Torch
Item Specification
Power Supply
120V, 20A, 50/60 Hz, Single Phase
230V, 35A, 50/60 Hz, Single Phase
Output No Load Voltage 65V
Rated Duty Cycle 35% @ 200A
DC TIG Output Range
10 - 135A with 120V Input Power
10 - 200A with 230V Input Power
AC TIG Output Range
20 - 135A with 120V Input Power
20 - 200A with 230V Input Power
Stick Welding Output
Range
20 - 120A with 120V Input Power
20 - 160A with 230V Input Power
Pulse Frequency 0.2 - 200 HZ
AC Arc Frequency 50 to 150 HZ
AC Arc Balance Control 50% to 85% EN
Weight 37-1/2 lbs.
Dimension L×W×H 19.75 in. x 9.5 in. x 16.125 in.