Full Product Manual

Page of 24
7
DESCRIPTION
METAL MAN FC135T 115 volt input, 135 amp AC output flux core only wire feed welders is
economical and easy to use. It requires no shielding gas and welds 8 gauge to 3/16" mild steel
materials with .030" or .035" flux core wires on 4" or 8" spools. This unit features 2 voltage ranges, a
set up chart, a cooling fan, trigger activated arc, overload protection, 8-1/2 ft torch with Tweco style
series 11 replacement parts and 6 ft ground cable and clamp. The FC135T is ideal for use when
welding mild steel 18 gauge to 3/16” for light industrial applications (FOR USE WITH FLUX CORE
WIRE ONLY).
ON/OFF Switch
In the “OFF” position no power is being supplied to the torch. In the “ON” position power is
supplied to the main transformer and control circuit.
Voltage Setting
1-2 switch is on the front panel of machine. There are two voltage settings. Refer to the “set up”
chart inside the wire feed compartment for initial adjustment settings.
Wire Speed Control
Adjustment of the wire feed speed (amperage).
Ground Cable and Clamp
The ground cable and clamp are attached to the work piece to complete the circuit allowing the flow
of current needed to weld.
Voltage
Setting
Wire Speed
Control
Ground Cable
And Clamp
Torch
Thermal Overload
Indicator
On/Off
Switch
Power
Cord