Product Brochure

SPECIFICATIONS
The Metal Man Inverter Powered Multi-Process 141 is a
portable DC inverter wire feed welder capable of welding
with solid wire (with shielding gas) or with flux core wire. It
comes ready to accept part number EZFSG2 optional Spool
Gun for welding aluminum. This machine also has smooth
DC stick capabilities and the ability to perform lift start DC
TIG welding on steel and stainless steel materials with part
number ACTT1, the optional TIG Torch.
This Metal Man Inverter Powered Multi-Process 141 is ca-
pable of MIG welding 3/16ʺ steel in a single pass. It uses
leading edge Inverter Technology to provide high quality
welds that are crisp, clean, and consistent with plenty of
power that will impress the most experienced of welders.
Stick weld with electrodes up to 3/32ʺ with this exceptionally
smooth DC stick welding output. Stick weld on materials
such as steel, stainless steel, cast iron, hard facing and alu-
minum. This unit is an exceptional multi-process machine.
Typical applications for include home/hobbyist, construction,
auto repair, farm and ranch and light industrial applications.
Order Part Number: MP141
Multi-Process 141
www.MetalManGear.com
Regulator/
Flowmeter
10 Foot
Gas Hose
10 Foot
MIG Gun
Infinite Wire Feed
Speed Control
Infinite Voltage
Control
10 Foot
Ground Cable
With Clamp
Spot Time
Adjustment
10 Foot
Electrode Holder
And Cable
Digital
Meters
Spool Gun/MIG Torch/
DC Stick Welding
Selector
Item Specification
Power Supply 120V, 20A, 50/60 Hz, Single Phase
No-Load Voltage 68V DC
Output Range MIG: 30 to 90A DC (140 Peak)
STICK/TIG: 30 to 70A DC
Duty Cycle 30% @ 90A
Suggested Wire Steel, Stainless Steel, Aluminum
Suggested Wire
Diameter
.023, .030, .035
Suggested
Electrodes
E6013, E7014, E7018, Stainless Steel
Electrode
Diameter
1/16ʺ to 3/32ʺ
Dimensions
19-1/2” x 9-1/2” x 14-1/2”
Weight 24-1/4 lb.