Installation Guide

© Metal Sales Manufacturing Corporation / Subject to change without notice / Effective 11/14
18
1.25" Corrugated
2.5" Corrugated
Whenhandlingpaintedsteel,careshouldbetakentopreventscratchingofmaterial.Cleanglovesshouldbewornatalltimes
topreventareactionwithsaltsfoundonbareskin.Installersshouldwearrubbersoleshoestokeepfromscuffingmaterial
whilewalkingontheroof.
Handlingofindividualpanelsshouldbedonecarefullyandproperlytoavoidbendingordamaging.Panelsshouldbecarried
bygraspingtheedgeofthepanelsothatthepanelisverticaltotheground.Thepanelshouldnotbecarriedhorizontaltothe
groundasthiscouldcausethepaneltobuckleorbendinthecenter.
Normally,individualpanelscanbehandledbypeopleplacedevery6'-0"to8'-0"alongthelengthofthepanel.
MANUAL HANDLING
CORRECT
6' - 8' MAX
HANDLING MATERIAL (cont.)
INCORRECT