Installation Guide

© Metal Sales Manufacturing Corporation / Subject to change without notice / Effective 6/14
29
CLASSIC RIB
®
INSTALLATION OVERVIEW
Prevailing
Winds
 As shown below with the number designations, install panel against the prevailing wind.
 Make sure panels are square and plumb, to assure straight and proper alignment of the entire row of panels.
 For areas with high wind considerations, closer fastener spacing may be required.
 It is necessary to attach a temporary guide to the foundation to use as an alignment guide when installing siding panels.
 Siphon groove side of panel must be overlapped with the non-siphon groove side of the adjacent panel (if applicable).
INSTALLATION OVERVIEW
1
2
4
3
VALLEY DETAIL
(SEE PAGE 40)
RIDGE DETAIL
(SEE PAGE 39)
EAVE / GUTTER DETAIL
(SEE PAGE 37, 38, 40)
CHIMNEY DETAIL
(SEE PAGE 41)
ROOF PENETRATION
(SEE PAGE 41)
HIP DETAIL
(SEE PAGE 39)
GABLE DETAIL
(SEE PAGE 39)