Instructions / Assembly

C ONDENSED

T ECHNICAL

R EFERENCE

ARCHITECTURAL

COMMERCIAL

PANEL

OPEN FRAMING OR

SOLID SUBSTRATE

DIRECT

FASTENED

36"

COVERAGE

MINIMUM

SLOPE

3:12

Finishes: MS Colorfast45

and Acrylic Coated Galvalume

Substrates:

Acrylic Coated Galvalume

- AZ55 per ASTM A792

MS Colorfast45

- AZ50 per ASTM A792 or G60, G90, G100 per ASTM A653

Gauges: 26ga and 29ga standard

36" panel coverage,

" rib height

Trapezoidal ribs on 9" centers

Applies over open framing or solid substrate

Exposed fastener, low proﬁ le panel

PANEL OVERVIEW

PRO-PANEL II

X UL 2218, Class 4 Impact Resistance

X UL 790, Class A Fire Resistance Rating

X 2007 Florida Approval #8131.3

X ASTM E 455-04, Diaphram Capacity

X ASTM E 283/331 Air and Water Leakage

TESTING

Anti-Siphon Groove

36" Coverage

Optional

Proﬁ le

PAGE 1
CONDENSED TECHNICAL REFERENCE ® PRO-PANEL II 36" Coverage Anti-Siphon Groove C 9" 5 /8" 31/8" 23/4" Optional Profile ARCHITECTURAL COMMERCIAL PANEL DIRECT FASTENED 36" COVERAGE MINIMUM SLOPE 3:12 PANEL OVERVIEW X Finishes: MS Colorfast45® and Acrylic Coated Galvalume® X Substrates: Acrylic Coated Galvalume® - AZ55 per ASTM A792 MS Colorfast45® - AZ50 per ASTM A792 or G60, G90, G100 per ASTM A653 X Gauges: 26ga and 29ga standard X 36" panel coverage, 5/8" rib height X Trapezoidal ribs on 9" ce
PAGE 2
CONDENSED TECHNICAL REFERENCE ® PRO-PANEL II GENERAL INFORMATION ATTACHMENT DETAIL X Slope 1 /4"-14 x 7/8" Stitch Screw (1'-0" o.c.) The minimum recommended slope for Pro-Panel II® roof panel is 3:12. #9-15 Woodscrew X Substructure Pro-Panel II® is designed to be utilized over open structural framing, or a solid substrate. To avoid panel distortion, use a properly aligned and uniform substructure.