Installation Manual

STILE

IMPORTANT INFORMATION

SAFETY

STUDY APPLICABLE OSHA AND OTHER SAFETY REQUIREMENTS BEFORE FOLLOWING THESE

INSTRUCTIONS.

The installation of metal roof systems is a dangerous procedure and should be supervised by trained

knowledgeable erectors. USE EXTREME CARE WHILE INSTALLING ROOF PANELS. It is not possible for

Metal Sales to be aware of all the possible job site situations that could cause an unsafe condition to

exist. The erector of the roof system is responsible for reading these instructions and determining the

safest way to install the roof system.

These instructions are provided only as a guide to show a knowledgeable, trained erector the correct

parts placement one to another. If following any of the installation steps would endanger a worker, the

erector should stop work and decide upon a corrective action.

Do not use the roof panels as a walking platform. The roof panels will not withstand the weight of a

person standing at the edge of the panel.

Do not stand on the roof panels at the ends until the panels have has been attached.

THE APPLICATION AND DETAIL DRAWINGS IN THIS MANUAL ARE STRICTLY FOR ILLUSTRATION

PURPOSES AND MAY NOT BE APPLICABLE TO ALL BUILDING DESIGNS OR PRODUCT INSTALLATIONS.

ALL PROJECTS SHOULD CONFORM TO APPLICABLE BUILDING CODES FOR THAT PARTICULAR AREA. IT

IS RECOMMENDED TO FOLLOW ALL BUILDING REGULATIONS AND STANDARD INDUSTRY PRACTICES.

METAL SALES MANUFACTURING CORPORATION IS NOT RESPONSIBLE FOR THE PERFORMANCE OF

THIS ROOF SYSTEM IF IT IS NOT INSTALLED IN ACCORDANCE WITH THE SUGGESTED INSTRUCTIONS

REFERENCED IN THIS MANUAL. IF THERE IS A CONFLICT BETWEEN THIS MANUAL AND THE ACTUAL

ERECTION DRAWINGS, THE ERECTION DRAWINGS ARE TO TAKE PRECEDENCE.

PRIOR TO ORDERING AND INSTALLING MATERIALS, ALL DIMENSIONS SHOULD BE VERIFIED BY FIELD

MEASUREMENTS.

METAL SALES RESERVES THE RIGHT TO MODIFY, WITHOUT NOTICE, ANY DETAILS, RECOMMENDATIONS

OR SUGGESTIONS. ANY QUESTIONS YOU MAY HAVE REGARDING PROPER INSTALLATION OF THE STILE

ROOFING SYSTEM SHOULD BE DIRECTED TO METAL SALES.

CONSULT METAL SALES FOR ANY ADDITIONAL INFORMATION NOT OUTLINED IN THIS MANUAL.

THIS MANUAL IS DESIGNED TO BE UTILIZED AS A GUIDE WHEN INSTALLING THE STILE ROOFING

SYSTEM. IT IS THE RESPONSIBILITY OF THE ERECTOR TO ENSURE THE SAFE INSTALLATION OF THIS

PRODUCT SYSTEM.

Provide required safety railings, netting or safety lines for crew members working on the roof.