Specification Sheet

ManualsBrandsMetalbest ManualsHVAC6" Stainless Steel Aluminum Pull Down Installation Cone

MODEL AFCL ALUMINUM PRODUCT LINE - cont’d

AFCL FLEX LENGTHS

Use the Flex Lengths where the Model AFCL Aluminum Flex Liner Lengths and Component Parts are

purchased separately. Flex Lengths are packaged in 25’ Coils in 5.5” diamter and 35’ Coils in 3”, 4”, 5”,

5.5”, 6” and 7” diameters. 50’ coils are available as a special order in 3”, 4” & 5” diameters. Only 10’

flex lengths include a flex connector.

Note: 8” x 10’ length may be used with Model HE40 Gravity Vent Kit

Inner Flex Product Product

Diameter Length Codes Number DESCRIPTION

MORTAR GUARDS

Use a Mortar Guard where the Flex Liner passes through a non-combustible wall.

Mortar Guards can be used with either Aluminum or Stainless Steel Flex Liners.

Two sizes are adjustable to fit diameters 3" to 5" or 6" to 8".

Inner Flex Product Product

Diameter Length Codes Number DESCRIPTION

3" – 5" NA 170247 FX3-5 MG 3" – 5" Mortar Guard

6" – 8" NA 170249 FX6-8-MG 6" – 8" Mortar Guard

PULL DOWNS

Use a Pull Down to guide the Flex Liner through the masonry chimney.

Pull downs can be used with either Aluminum or Stainless Steel Flex Liners.

Simply attach a Pull Down to the Liner with screws and thread a rope through the loop before dropping

a Liner down a chimney from the roof. Pull on rope as required until the Liner is all-the-way through.

Inner Flex Product Product

Diameter Length Codes Number DESCRIPTION

3" NA 173000 FX3-PD 3" Pull Down

4" NA 174000 FX4-PD 4" Pull Down

5" NA 175000 FX5-PD 5" Pull Down

5.5" NA 175500 FX55-PD 5.5" Pull Down * USA Only

6" NA 176000 FX6-PD 6" Pull Down

7" NA 177000 FX7-PD 7" Pull Down

8" NA 178000 FX8-PD 8" Pull Down

3" 10’ 1730110 AF3-10LC 3” x 10 Ft. Aluminum Flex w/connector

35’ 1730350 AF3-35L 3" X 35 Ft. Aluminum Flex

50’ 1730500 AF3-50L 3" x 50 Ft. Aluminum Flex

4" 10’ 1740110 AF4-10LC 4” x 10 Ft. Aluminum Flex w/connector

35’ 1740350 AF4-35L 4" X 35 Ft. Aluminum Flex

50’ 1740500 AF4-50L 4" x 50 Ft. Aluminum Flex

5" 10’ 1750110 AF5-10LC 5” x 10 Ft. Aluminum Flex w/connector

35’ 1750350 AF5-35L 5" X 35 Ft. Aluminum Flex

50’ 1750500 AF5-50L 5" X 50 Ft. Aluminum Flex

5.5” 10’ 1755110 AF55-10LC 5.5" X 10 Ft. Aluminum Flex

w/connector

25’ 1759033 AF55-25K 5.5" X 25 Ft. Aluminum Flex

35’ 1759055 AF55-35K 5.5" X 35 Ft. Aluminum Flex

6” 10’ 1760110 AF6-10LC 6" X 10 Ft. Aluminum Flex w/connector

35’ 1760350 AF6-35L 6" X 35 Ft. Aluminum Flex

7" 10’ 1770110 AF7-10LC 7” x 10 Ft. Aluminum Flex w/connector

35’ 1770350 AF7-35L 7" X 35 Ft. Aluminum Flex

8” 10’ 1780110 AF8-10L 8” x 10 Ft. Aluminum Flex w/connector

*Canada Only

*USA Only