User's Manual

Getting Started
15
4 Plug one end of the telephone line into a phone jack and the other
end into the “TO WALL” port on the back of Ojo.
5 Turn on the power to the modem, wait one minute, then turn on
the power to the router.
6 Plug one end of the Ojo power cord into the Ojo power block and
the other end into an electrical outlet.
7 Plug the Ojo power block into the “12V/3A” port on the back of Ojo.
Ojo powers on, performs a series of self-tests,
and displays a series of startup screens. After
a few minutes, the message “Please Call
Customer Service” is displayed.