User's Manual

Using the Basic Functions

Note: The next time you place or receive a call from this number, the

Caller ID picture you saved will be displayed. You can take a new

Caller ID picture during a subsequent call by following the above

procedure.

Note: Ojo adds the picture directly into the Phonebook entry when

you are calling someone that is already in the Phonebook.

Adjusting the Speakerphone Volume During a Call

There are two ways to adjust the volume while on a call:

x Press the volume buttons on the right side of Ojo’s base.

x Press

or on the handset.

Note: When you change the volume, the video screen temporarily

displays the volume indicator.

Using the Cordless Handset for Audio Privacy

The speakerphone is active whenever the handset is in the handset cradle.

For audio privacy:

Pick up the handset and use it as a portable phone.

Return the handset to the cradle to activate the speakerphone.

Note: When the handset is out of the cradle, you can use the three

buttons on the cradle to: 1) Answer a call by pressing TALK, 2) Press

LOCATE to activate your camera, 3) End a call by pressing END, or

4) locate a misplaced handset by pressing and holding LOCATE. The

handset will emit a distinctive sound.

Muting the Audio During a Call

You can prevent the caller from hearing you or any other noise or

conversation on your end of the call.

Press the MUTE button. Ojo displays a mute indicator. You can still

hear the caller speaking, but the caller cannot hear you.

Press MUTE again so that the caller can hear you.

Note: This does not affect the video.