User's Manual

6
FCC and Interference Information
This equipment complies with Parts 15 and 68 of the FCC rules and the
requirements adopted by the Administrative Council for Terminal
Attachments (ACTA).
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and
modular plug are provided with this product. The product is designed to be
connected to a compatible modular jack that is also compliant. See
installation instructions for details.
Notification of the Local Telephone Company
On the bottom of this equipment is a label that contains, among other
information, a product identifier in the form US:AAAEQ##TXXXX. You
must, upon request, provide this information to your telephone company.
The digits represented by ## in the product identifier indicate the Ringer
Equivalency Number (REN) for this equipment. The REN is useful in
determining the number of devices you may connect to your telephone
line and still have all of these devices ring when your telephone number is
called. In most (but not all) areas, the sum of the RENs of all devices
connected to one line should not exceed five (5). To be certain of the
number of devices you may connect to your line as determined by the
REN, contact your local telephone company.
Notes:
• This equipment may not be used on coin service provided by the
telephone company.
• Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or
corporation commission for information.
• If your home has specially wired alarm equipment connected to the
telephone line, ensure that the installation of Ojo does not disable your
alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
• Notice must be given to the telephone company upon permanent
disconnection of your telephone from your line.
• The FCC requires that you connect your cordless telephone to the
nationwide telephone network through a modular telephone jack
(USOC RJ11C/RJ11W or RJ14C/RJ14W).