Installation Guide

How-To-Measure Guide
Measure the width of the area to be
covered (”A”). Round to the nearest even foot
increment. A will be the total width of cover.
IF MOUNTING TO HOUSE WALL, Measure the
distance from the back wall of building to the
outside edge of desired area (”B”). “B will be the
total projection of cover.
IF ATTACHING TO THE EXISTING EAVE, Measure the distance from the wall to the outside of the eave (”C”).
Subtract “C from “B” (distance from back wall to outside edge) to arrive at the measurement (”D”). “D” will be
the total projection of cover.
-All units come with 10’ tall post
-Posts can be cut to desired height
*Solid patio cover post are even with total projection
A”= _____Total width of cover
“B”= _____Total Projection of cover*
“C”= _____Eave overhang
“D”=_____Total Projection from eave*
“E” = _____Height

Summary of content (1 pages)