Instructions / Assembly

METAL CONDUCTS ELECTRICITY:

Do not use this equipment where contact may be made with power lines or other live electrical circuits.

FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS COULD

RESULT IN SERIOUS INJURY OR DEATH.

READ BEFORE BEGINNING ASSEMBLY.

ASSEMBLY PROCESS

1. Preparation

• Locate the tower, ensuring ground is level.

• Unlock the interlock pins on all frames.

• When installed, always move the interlock pin to

the “locked” position.

• Sort the braces into horizontal and diagonal

braces - the diagonals are slightly longer.

• Unlock the brace locks.

2. Base (attaching castors)

Step 1: Ensure interlock pins are removed from the

base frame

Step 2: Install castor into the leg by pushing with

manual force only, (without tool use).

Step 3: Insert the interlock pin as shown

Step 4: Lock castors before ascending any part of

the tower.

3. Locking down the platform (Windlock)

A windlock clip is installed on the platform at the hook.

This is locked as shown here.

Note the locking and unlocking position for

the castors

DO NOT OVERLOAD:

Scaffolding maximum load: 800 lb (363 kg). Platform: 25 lb/sq. ft. (122 kg/m

)