OPERATIONAL SAFETY AND ASSEMBLY INSTRUCTIONS MODEL : I-BM6O4 SET OF 4 OUTRIGGERS WITH CASTERS ENGLISH FRANÇAIS ESPAÑOL Picture may differ from actual product READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE. 2 YEAR WARRANTY OSHA CONFORMANCE TO 29 CFR Pt. 1926 ANSI CSA MEETS CODE A10.8 CONFORMITY TO CSA STANDARD S269.
OPERATIONAL SAFETY READ BEFORE BEGINNING ASSEMBLY. FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. METAL CONDUCTS ELECTRICITY: Do not use this equipment where contact may be made with power lines or other live electrical circuits. DO NOT OVERLOAD: This scaffolding is designed to support a maximum load of 1,000 lb (454 kg).
ASSEMBLY INSTRUCTIONS 1 2 3 4 5 6 7 Erect the scaffolding by following the manufac turer instructions (maximum of 2 units high). Install the coupling pins on top ends of the structure, lock in place by using provided locking pins. 8 Stack the second unit to the first one, insert the base of the structure in the coupling pins in place, secure the second unit to the coupling pins with the provided locking pins. 7 Install a caster into an outrigger and secure it with a lock pin. Set caster brake.
Customer Service: 1 800 363-7587 Our customer service staff is available to help you. For help with product assembly, to report damaged or missing parts, or for any other information about this product, please call our toll-free number. KEEP THIS MANUAL FOR FUTURE REFERENCE Keep this manual and the original sales invoice in a safe, dry place for future reference. Two-Year Limited Warranty Metaltech-Omega Inc. guarantees this product against any material defect.
CONSIGNES DE SÉCURITÉ ET INSTRUCTIONS DE MONTAGE MODÈLE : I-BM6O4 ENSEMBLE DE 4 STABILISATEURS AVEC ROUES ENGLISH FRANÇAIS ESPAÑOL L’image peut différer du produit réel LIRE SOIGNEUSEMENT CES INSTRUCTIONS AVANT D’UTILISER CE PRODUIT. CONSERVER CE MANUEL À PORTÉE DE MAIN POUR RÉFÉRENCE ULTÉRIEURE. 2 ANS DE GARANTIE OSHA ANSI CSA EN CONFORMITÉ AVEC 29 CFR Pt. 1926 RENCONTRE LA NORME A10.8 CONFORME À LA NORME CSA S269.
CONSIGNES DE SÉCURITÉ LIRE SOIGNEUSEMENT AVANT D’EFFECTUER LE MONTAGE. LA NON-COMPRÉHENSION ET LE NON-RESPECT DE TOUTES LES RÈGLES DE SÉCURITÉ ET DE TOUTES LES CONSIGNES D’ASSEMBLAGE PEUT ENTRAÎNER DES BLESSURES GRAVES OU MORTELLES. LE MÉTAL EST CONDUCTEUR D’ÉLECTRICITÉ : Ne pas utiliser cet équipement où il pourrait entrer en contact avec une ligne électrique ou une source de courant. ÉVITEZ LES SURCHARGES : Cet échafaudage est conçu pour soutenir une charge maximale de 1000 lb (454 kg).
INSTRUCTIONS DE MONTAGE 1 2 3 4 5 6 7 8 Ériger l’échafaudage selon les directives du fabricant (maximum de 2 unités de haut). Installer les goupilles d’accouplement au sommet des quatre extrémités des montants de la structure, les fixer en place à l’aide des tiges de verrouillage fournies.
Service à la clientèle : 1 800 363-7587 Notre personnel du service à la clientèle est disponible pour vous assister. Que ce soit pour vous aider à assembler ce produit, pour signaler une pièce manquante ou endommagée, ou pour toute autre information à propos de ce produit, veuillez composer notre numéro sans frais. CONSERVER CE MANUEL POUR RÉFÉRENCE ULTÉRIEURE Garder ce manuel et la facture d’achat originale dans un endroit sec et sûr pour référence ultérieure.
DIRECTIVAS DE SEGURIDAD E INSTRUCCIONES DE MONTAJE MODELO : I-BM6O4 JUEGO DE 4 ESTABILIZADORES CON RUEDAS ENGLISH FRANÇAIS ESPAÑOL La imagen puede variar del producto real LEA ATENTAMENTE ESTAS INSTRUCCIONES ANTES DE UTILIZAR ESTE PRODUCTO. CONSERVE ESTE MANUAL COMO REFERENCIA ULTERIOR. 2 AÑOS DE GARANTÍA OSHA ANSI CSA CUMPLE CON 29 CFR PT. 1926 ENCUENTRA LA NORMA A10.8 CONFORME A LA NORMA CSA S269.
DIRECTIVAS DE SEGURIDAD LEA ATENTAMENTE ANTES DE COMENZAR EL MONTAJE. LA FALTA DE COMPRENSIÓN Y RESPETO A TODAS LAS REGLAS DE SEGURIDAD Y EL INCUMPLIMIENTO DE LAS INSTRUCCIONES DE MONTAJE PUEDEN CAUSAR LESIONES GRAVES O MORTALES EL METAL ES CONDUCTOR DE ELÉCTRICIDAD: No use este equipo donde pueda estar en contacto con líneas de electricidad o circuitos eléctricos vivos NO SOBRECARGUE: Este andamio está concebido para soportar una carga máxima de 1000 lb (454 kg).
INSTRUCCIONES DE MONTAJE 1 2 3 4 5 6 7 8 Construya el andamio según las directivas del fabricante (máximo de dos unidades de alto). Instale las clavijas de apareamiento a la cima de las cuatro extremidades de los montantes de la estructura. Fíjelas en su sitio con la ayuda de los pestillos de cierre incluidos. 8 Superponga la segunda unidad del andamio a la primera metiendo las bases de la estructura en las clavijas de apareamiento previamente instaladas.
Servicio al cliente 1 800 363-7587 Nuestro servicio al cliente está dispuesto a ayudarle, sea con el montaje de este producto, sea para avisar que una pieza falta o está dañada, sea para cualquier otra información sobre este producto; por favor marque nuestro número gratuito. CONSERVE ESTE MANUAL PARA REFERENCIA POSTERIOR Guarde este manual y la factura de compra original en un lugar seco y seguro para referencia posterior. Garantia limitada de 2 años WWW.METALTECH.