Instructions / Assembly

OPERATIONAL SAFETY
METAL CONDUCTS ELECTRICITY:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
DO NOT OVERLOAD:
This Drywall Cart is designed to support a maximum load of 3,000 lb (1,361 kg)
FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
READ BEFORE BEGINNING ASSEMBLY.
OPERATION AND SAFETY
All photos and drawings in this booklet are for reference purposes only. Refer to applicable
OSHA, ANSI or CSA codes and regulations for the proper use of this equipment.
2
LB
/
KG
MAX. 3,000 lb
(1,361 kg)
ALWAYS INSPECT
BEFORE USE
DRYWALL CART
MAXIMUM LOAD
CAPACITY:
3,000 lb (1,361 kg)
METAL CONDUCTS
ELECTRICTY
ACIDS ARE
CORROSIVE. DO
NOT EXPOSE UNIT
TO CORROSIVE
SUBSTANCES
UNEVEN WEIGHT
DISTRIBUTION COULD
CAUSE CART TIPPING
MUST BE USED ON A
FIRM SURFACE THAT
IS FREE OF PITS,
DEBRIS, HOLES OR
OBSTRUCTIONS.
UNIT SHALL ONLY BE
USED ON FIRM AND
LEVEL SURFACES
NEVER MOVE
A DRYWALL CART
WITH WORKER WITHIN
SUDDENLY
DROPPING OR
BOUNCING A LOAD
ON THE DRYWALL
CART MAY CREATE
AN EXCESS LOAD
Do not use this equipment if you are in poor health,
taking medications, drugs, or have been consuming
alcohol, all of which may impair your ability to work
safely on this product.
Always use this cart in conformity with local or national
legislation which applies.
Inspect before use. Do not use if damaged. Check for
missing parts.
Examine thoroughly to make sure Drywall Cart is set
up properly.
All components must be complete, functioning
properly and correctly assembled.
Any incomplete part, missing part, or ill-fitting part
should be replaced prior to use.
Use the right product for the job. Do not modify the
Drywall Cart and do not use the Drywall Cart for a
purpose for which it was not intended.
Do not exceed the maximum load capacity
of 3,000 lb (1,361 kg).
Always distribute objects in the Drywall Cart evenly,
and resting adequately on the handle bar. Uneven
weight distribution could cause Drywall Cart tipping.
Be aware of dynamic loading. Suddenly dropping or
bouncing a load on the Drywall Cart may create, for
a brief instant, an excess load, which may result in
damage to the product and/or personal injury.
This Drywall Cart must be used on solid flat surfaces.
This Drywall Cart must be used on a firm surface that
is free of pits, debris, holes or obstructions.
Acids are corrosive and can seriously affect strength.
Do not expose this Drywall Cart to corrosive
substances.
Never move a Drywall Cart with worker within.
Do not use powered devices to propel this Drywall
Cart. Use extra caution near operating machinery.
Do not modify this Drywall Cart or any of its
component.