Instructions / Assembly
OPERATIONAL SAFETY
METAL CONDUCTS ELECTRICITY:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
DO NOT OVERLOAD:
This scaffolding is designed to support a maximum load of 1,000 lb (454 kg)
FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
READ BEFORE BEGINNING ASSEMBLY.
GUARDRAILS RAILS MUST
BE INSTALLED ON ALL OPEN
SIDES OF A WORK PLATFORM
WHERE A PERSON COULD
FALL FROM A HEIGHT
OF 6 FT (1.8 M) OR MORE
ALWAYS KEEP BODY
CENTERED INSIDE
STRUCTURE OF UNIT
UNIT SHALL ONLY BE
USED ON FIRM AND
LEVEL SURFACES
ALWAYS LOCK
THE ALL CASTERS
BEFORE CLIMBING
MAX
MAX. 1,000 lb
(454 kg)
SCAFFOLD
MAXIMUM LOAD
CAPACITY:
1,000 lb (454 kg)
NEVER PLACE
ANYTHING UNDER OR
ATTACH ANYTHING
TO UNIT
DO NOT USE
THE UNIT AS
A FOOTBRIDGE
NEVER TRY MOVING
THE UNIT WHILE
STANDING ON IT
DO NOT USE IN
INCLEMENT WEATHER
OR HIGH WINDS
METAL CONDUCTS
ELECTRICTY
ACIDS ARE
CORROSIVE.
DO NOT EXPOSE
UNIT TO CORROSIVE
SUBSTANCES
ERECT ON FIRM
AND LEVEL GROUND
REMOVE OR FASTEN
TOOLS, MATERIAL OR
EQUIPMENT BEFORE
MOVING. NEVER MOVE
A SCAFFOLD WITH
WORKER WITHIN.
ALWAYS INSPECT
BEFORE USE
NEVER STACK MORE
THAN TWO UNITS
2
MAX.
6’
(1.8 m)
2
OPERATION AND SAFETY
All photos and drawings in this booklet are for reference purposes only. Refer to applicable OSHA, ANSI or CSA codes and regulations for the proper use of this equipment.
Do not use this equipment if you are in poor health, taking medications, drugs,
or have been consuming alcohol, all of which may impair your ability to work
safely on this product.
Always use this scaffold in conformity with local or national legislation which
applies.
Inspect before use. Do not use scaffold if damaged
or parts are missing.
Examine thoroughly to make sure unit is properly set up.
Securely lock all braces and deck before each use.
The deck must be fully seated within the braces and locked with the security
latches before each use.
The wood deck must be checked for loose or missing steel frame
components, large holes or thin spots where the plywood has been worn.
Worn or damaged deck must be replaced promptly.
Braces must be inspected to ensure locking mechanisms are working
correctly. Any brace with damaged locking devices should not be used.
Never stack more than two units.
There must be a minimum of two side braces installed on each scaffold level
and evenly spaced throughout the scaffold. Lack of adequate bracing could
cause scaffold to collapse.
Always use outriggers and guardrails when stacking units.
Guardrails must be installed on all open sides of a work deck where a person
could fall from a height of 6 ft (1.8 m) or more.
Do not climb unless all casters are in locked position.
Always remove casters when using this scaffolding on stairs.
Erect to be plumb on firm and level surface.
This scaffold must be used on a firm surface that is free
of pits, debris, holes or obstructions.
Never place anything under or attach anything to this scaffold to increase
height or to adjust to uneven surfaces.
Acids are corrosive and can seriously affect strength.
Do not expose this scaffold to corrosive substances.
Keep scaffold free of debris and unnecessary equipment.
Keep your body close to the scaffold as you climb.
Do not overreach. Always keep body centered inside structure of scaffold.
Remove or fasten all tools, material or equipment before moving. Use extra
caution when moving to avoid tipping.
Never try moving this scaffold while standing on it.
Never move a scaffold with a worker within.
Do not use powered devices to propel this scaffold. Use extra caution near
operating machinery.
Do not use if the surface is not firm and level.
Do not use in inclement weather or high winds.
Maintain a firm grip while climbing.
Do not modify the scaffold or any of its components.
Do not use the scaffold as a footbridge.