Installation Guide

ManualsBrandsMetalux ManualsCommercial LightingSkyRidge 100-Watt 2x2 White Integrated LED Troffer

INS #

Brand Logo

reversed out of

black

INS #

IB519014EN

Installation Instructions - SkyRidge Surface Mount Bracket

Instructions d’installation - Support pour montage en surface

SkyRidge

Instrucciones de instalación – Soporte de montaje de superﬁcie

SkyRidge

IMPORTANT: Read carefully before installing fixture. Retain for future reference.

ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery

receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15

days of delivery. All damaged material, complete with original packing must be retained.

WARNING

Risk of fire, electrical shock, cuts and or other casualty

hazards. This product must be installed in accordance

with the applicable installation code by a qualified

electrician or a person familiar with the construction

and operation of the product and the hazards involved.

Eaton assumes no responsibility for claims brought

about by improper or careless installation or handling

of this product.

WARNING

Risk of Fire and Electric Shock. If not qualified, consult

an electrician.

CAUTION

Edges May Cut. Handle with care.

CAUTION

Risk of burn. Disconnect power and allow fixture to cool

before changing bulb or handling fixture.

NOTICE: Green ground screw provided in proper location.

Do not relocate.

NOTICE: Minimum 90° supply conductors.

NOTE: Specifications and dimensions subject to change

without notice.

INSTALLATION

1. Remove the driver compartment from the driver mount

bracket in standard SkyRidge fixture (Figure 1).

Figure 1.

Driver Compartment

Summary of content (8 pages)

PAGE 1
Brand Logo reversed out of black IB519014EN INS # Installation Instructions - SkyRidge Surface Mount Bracket Instructions d’installation - Support pour montage en surface SkyRidge Instrucciones de instalación – Soporte de montaje de superficie SkyRidge WARNING Risk of fire, electrical shock, cuts and or other casualty hazards.
PAGE 2
Installation Instructions - SkyRidge Surface Mount Bracket 2. Insert the surface mount accessory bracket into tabs in driver mount bracket (Figure 2). 3. Mount the surface mount over driver mount bracket using three screws (Figure 3). 4. Place the driver compartment and screw into place (Figure 4). Figure 3. Driver Compartment Surface Mount Bracket Driver Mount Bracket Figure 2. Figure 4.
PAGE 3
Instructions d’installation - Support pour montage en surface SkyRidge AVERTISSEMENT MISE EN GARDE Risques d'incendie, de décharge électrique, de coupures et autres dangers de blessure. Ce produit doit être installé conformément au code d'installation en vigueur par un électricien qualifié ou une personne familière avec la construction et le fonctionnement du produit ainsi que les risques inhérents.
PAGE 4
Instructions d’installation - Support pour montage en surface SkyRidge 3. 4. Installez le support de montage en surface par-dessus le support de montage du circuit de sortie en utilisant les trois (3) vis (Figure 3). Insérez le compartiment du circuit de sortie et vissez fermement en place (Figure 4). Compartiment du circuit de sortie Figure 3. Figure 4.
PAGE 5
Instrucciones de instalación – Soporte de montaje de superficie SkyRidge ADVERTENCIA Riesgo de incendio, descarga eléctrica, cortes y otros riesgos de muerte. Un electricista calificado o una persona con conocimientos sobre la construcción y el funcionamiento del producto y los riesgos implicados debe instalarlo de conformidad con el código de instalación aplicable.
PAGE 6
Instrucciones de instalación – Soporte de montaje de superficie SkyRidge 3. Monte el montaje de superficie sobre el soporte de montaje del controlador usando tres tornillos (Figura 3). 4. Coloque el compartimento del controlador y ajuste los tornillos (Figura 4). Compartimento del controlador Figura 3. Figura 4.
PAGE 7
PAGE 8
Warranties and Limitation of Liability Please refer to www.eaton.com/LightingWarrantyTerms for our terms and conditions. Garanties et limitation de responsabilité Veuillez consulter le site www.eaton.com/LightingWarrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.eaton.com/LightingWarrantyTerms para conocer nuestros términos y condiciones. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.