Installation Guide
INS #
Brand Logo
reversed out of
black
INS #
IB519034EN
Installation Instructions – Cruze LED Retrofit Kit
Instructions d’installation – Cruze LED Retrofit Kit
Instrucciones de instalación – Del kit adaptador de luminaria LED
Cruze
WARNING
Risk of fire or electric shock. Retrofit kit installation
requires knowledge of lighting luminaires’ electrical
systems. If not qualified, do not attempt installation.
Contact a qualified electrician.
WARNING
Risk of fire or electric shock. Disconnect all power
before installing retrofit kit.
WARNING
Risk of fire or electric shock. Luminaire’s wiring,
ballast, or other electrical parts may be damaged
during installation of retrofit kit hardware. Check for
enclosed wiring and components.
WARNING
Risk of fire or electric shock. Install this kit only
in luminaires that have the construction features
and dimensions shown in the photographs and/or
drawings and where the input rating of the retrofit kit
does not exceed the input rating of the luminaire.
WARNING
Only those open holes indicated in the photographs
and/or drawings may be made or altered as a result of
kit installation. Do not leave any other open holes in
enclosure of wiring or electrical components.
WARNING
To prevent wiring damage or abrasion, do not expose
wiring to edges of sheet metal or any sharp objects.
CAUTION
Retrofit kit is used for 2’x4’ or 2’x2’ luminaires with min.
housing depth of 3” (measured from inside top of housing
to T-grid).
INSTALLATION
Retrofit Kit Contents:
2 – End Plates (A)
1 – Side Panel (B)
1 – Lens (C)
1 – Main Panel (D)
Recommended Tools:
For optimum installation we recommend using an 1800
RPM drill with a 1/4” Hex Driver Bit.
Wire cutters/strippers.
Flat head screwdriver
Main Panel
End x2
Side Panel
Lens
D
A
B
C