Specification
Metalux
24FP
LED
2' X 4' LED PANEL
General LED Panel.
Recessed in Insulated
Ceilings or Surface Mount
LOAD DATA (STOCK PRODUCT)
7/8"
[21mm]
7/16"
[11mm]
1-3/4"
[45mm]
47-3/4"
[1212mm]
23-3/4"
[602mm]
33"
[838mm]
10-5/8"
[270mm]
Two possible
driver locations
2"
[51mm]
6-3/8"
[162mm]
DIMENSIONS
Thd 13%
Power Factor 0.96
Weight 18.5
Low Temp. Start -20ºC
Catalog #
Project
Comments
Prepared by
Type
Date
California Title 24
Non-Residential
Compliant
PS519169EN
January 28, 2019 8:34 AM
FPanel LED panel series provides premium performance and pleasing
aesthetics while being optimized for shallow plenum grid ceilings or
surface mounting. These panels are ideal for new construction as they
were developed with Eaton's latest generation of solid state components
and electronic driver technologies. Its refined visual optics and integrated
grid retention clips provide the features needed for speed and installation
flexibility. LED FPanels are an excellent lighting solution for commercial
office spaces, schools, healthcare and retail merchandising areas.
DESCRIPTION
SPECIFICATION FEATURES
Construction
• Narrow aluminum bezel is tightly
held to code gauge steel back
plate
• Seamless corners to maximize
the light emitting surface with a
refined finish
Mounting
• Integral grid locking clips and
separate suspension clips
provided for installation
flexibility when additional
retention is required
• Junction box constructed of code
gauge galvanized steel with and
easy access hinged door
• Trade size knockouts provided
• Stock luminaire is less than 2”
for use in shallow plenum or low
ceiling spaces
• Surface or suspension mounting
kits available
• IP5X rating options available
• Factory installed flexible cable
with dimming leads options
available
Controls
• Standard UNV 120 - 277V driver
with 0-10V dimming to 10%
standard
• Compatible with field installed
wireless controls available for
either Wavelinx of LumaWatt Pro
Electrical
• Standard and High Efficacy
models available
• LED’s available in 3000K, 3500K,
4000K, and 5000K with a
minimum of 80 CRI
• 90 CRI available with 3000K
• Projected lumen maintenance
based on TM21 testing standards
is L73 > 60,000 hours
• Emergency battery pack options
available in 7w and 14w options
• Battery pack options available as
factory installed or field installed
for remote mounting
Optical Shielding
• Acrylic light guide with
specialized features to optimize
light extraction
• White frost lens with smooth
pattern for uniform illumination
• Scratch and impact resistant
Compliance
• Indoor luminaires are cULus
listed for 25C ambient
environments
• IC rated for direct insulation
contact
• RoHS compliant
• Damp location listed
• IESNA LM-79 and LM-80
standards compliant
• DesignLights Consortium®
Qualified and classified for
DLC Standard
• Can be used for State of California
Title 24 high efficacy luminaire
Warranty
• Five year warranty.