Specification Sheet

Metalux AP Series
SPECIFICATION FEATURES
Construction
Fixture channel, cover and end
plates are formed from cold
rolled steel and offers all of the
features needed for installation.
The SLSTP is post painted for ease
of handling. Decorative end caps
snap-on for an improved aesthetic
finish. The SLSTP is suitable for
either single or continuous row
applications.
Controls
Combine with energy saving
products like occupancy sensors,
daylighting controls, and lighting
relay panels to maximize
energy savings. Standard 0-10V
continuous dimming driver works
with any standard 0-10V control/
dimmer. Dimming range is 10%
to 100% and varies by control
device. 120V drivers work with
standard 120V phase cut dimmers.
See dimming compatability chart
posted on website. Optional simple
occupancy sensors enable code
compliance all in a simple package.
Electrical
Long-Life LED system with an
energy-efficient electronic driver
comes in UNV (120-277V) or
120V versions. Both drivers offer
smooth dimming with a number
of residential and commercial
dimmers. LED’s CCT are 3500K and
4000K with a CRI ≥ 80. Projected
life is 50,000 hours at 70% lumen
output.
Finish
Post painted with high reflective
paint – standard.
Shielding
SLSTP offers a frost lens with
decorative end caps for single
and end of the row applications.
Installation
Fixture may be surface, suspended,
or wall mounted. Multiple 7/8" K.O.
on back and one on each end. See
accessories below for ordering
information.
Compliance
cULus listed for damp location
rated. LED's comply with IESNA
LM-79 and LM-80 standards. Under
4", ADA Compliant. DesignLights
Consortium
®
Qualified and
classified for DLC Standard, refer to
www.designlights.org for details.
RoHS compliant. Suitable for use
in clothes closets when installed
in accordance with the NEC 410.16
spacing requirements.
Warranty
Five-year warranty.
SLSTP LENSED
LED
Lensed LED Striplight
PS519206EN
2-16-2018
The SLSTP is a low profile, high quality luminaire offering the latest
solid state lighting and electronic driver technology that optimizes
performance and energy efficiency. With the SLSTP's low profile design,
this series is an ideal solution for restricted spaces and meets traditional
requirements for single or continuous row applications.
The SLSTP is an excellent solution for commercial, industrial, retail or
residential applications. Ideal for new construction or simple fluorescent
retrofit replacement.
DESCRIPTION
2-7/16"
[62mm]
2-7/16"
[62mm]
WITH SENSOR – NO ENDCAP INSTALLED
2-3/8"
[60mm]
2-19/31"
[66
mm]
WITH ENDCAP INSTALLED
Safe and convenient means of
disconnecting power
Catalog #
Type
Date
Project
Comments
Prepared by
8'
2-1/2"
[64mm]
96" [2438mm]
K.O (9) 7/8" [22mm]
24-1/16"
[612mm]
47-15/16"
[1218mm]
7-9/16"
[192mm]
4'
2-7/16"
[62mm]
46-1/2" [1181mm]
2-1/8" [54mm]
23-1/4" [591mm]
K.O (5) 7/8" [22mm]
2'
2-7/16"
[62mm]
23-7/16" [595mm]
11-11/16" [297mm]
2-1/8" [54mm]
K.O (5) 7/8" [22mm]
MOUNTING DATA (SHOWN WITH ENDCAPS)
LOAD DATA
2' 4' 8'
PF 0.99 0.99 0.98
THD% 13.6 12.9 < 20
Weight 2.8 4.6 9
Low Temp
Start
-20C -20C -20C