Specification Sheet

Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone] ADF121629
METALUX
®
GR8, GC8, GC SERIES - NON-FLOATING DOOR ASSEMBLIES
MZ Modular Trim /
Aluminum
Type “G” Fixture
(Exposed Grid) A Recessed Luminaire with Narrow Flanges designed to rest on exposed 15/16" or 9/16" wide Inverted Grid Tees.
• Fixture Example: 2GR8-432-UNV-EB81-U
(Concealed T) A Recessed Luminaire with Narrow Flanges designed to rest on 15/16" wide Concealed Inverted Grid Tees
• Fixture Example 2EP3GAX-332S36I
• Optional Aluminum TK Trim Kit Available
– Available TK Trim Finishes: Natural Anodized Aluminum (N) Standard
and Baked White Enamel (W)
(Slot Grid) A Recessed Luminaire designed to rest on 9/16" Slot T Grid
• Fixture Example: 2GR8-432
• T-Bar Safety Clips Required
Type “F” Fixture
(Flange Trim) For factory installed ange, replace “G” in xture trim description with “F”. Factory installed ange available on GC8 and GC only,
eld installed kits are available for all other models and are listed below.
A Recessed Luminaire with Horizontal Steel or Aluminum (A) Flanges which conceal the edges of the ceiling opening
• Fixture example 2FC8-332
• Adjustable Swing Gates for mounting
• Optional Flange Kit available
– Field Convertible, Converts Grid Fixture (G) to Flange Fixture (F)
– Standard Flange Trim Finish: Baked White Enamel (W)
• Typical fixture ceiling opening requirements: Single – (Width) One-quarter Inch (1/4") plus nominal width, (Length) 1/4" plus
nominal length.
Rows - fixture quantity times fixture length plus 1/4".
• Plaster Frames available, see options and accessories section
Type “MZ” Fixture (GC Only)
(Modular Trim / Aluminum)
Concealed “T” Metal Pan
and Concealed “Z” Spline Application
A Recessed Luminaire Trimmed to a Modular / Concealed
Finished Dimension
• Fixture example: 2MZC-332
(complete fixture / factory installed trim)
• On complete ordered fixture, Modular MZ Trim matches door frame
assembly unless otherwise specified
• Adjustable Swing Gates for mounting
• Optional Aluminum Modular (MZ) Trim Kit available
– Field Convertible, converts Grid Fixture (G) to Modular Fixture (MZ)
– Available Aluminum Trim Finishes: Baked White Enamel (W) and
Natural Anodized Aluminum (N)
• For Concealed “T” and Concealed “Z” the main ceiling carries must be
on the sides of the Luminaire.
The weight of the Luminaire exists on the Swing-Gates and must be
supported by main carriers, not cross members.
At each end of the luminaire, an Angle Spline must be used, Cross or
Main T's cannot be used.
Integral Grid-Lock
Feature (Standard)
FLANGE KITS (Field Installed)
Fixture Fixture Size Flange Kit Ceiling Opening Size
GR8/GC8/GR5 1' x 4' FCS-14W-U (Steel) 12-1/4" x 48-1/4"
GC 1' x 4' F2-14W-U (Steel) 12-1/4" x 48-1/4"
GC 20" x 24" F2-2024W-U (Steel) 20-1/4" x 24-1/4"
GR8/GC8/GR5 2' x 2' FCTKA-22W-U 24-1/4" x 24-1/4"
GC 20" x 48" F2-28W-U (Steel) 20-1/4" x 48-1/4"
GR8/GC8/GR5 2' x 4' FCTKA-24W-U 24-1/4" x 48-1/4"
MODULAR / MZ
TRIM KIT / ALUMINUM
F2MZ/E-14W-U 1' x 4'
F2MZ/E-22W-U 2' x 2'
F2MZ/E-24W-U 2' x 4'
F2MZ/E-28W-U 20" x 48"
G Grid Lay In
(Standard)
G Concealed T
G Slot Grid
F Flange Trim
MZ Modular Trim /
Aluminum
TK TRIM KIT
TK-14N-U 1' x 4'
TK-22N-U 2' x 2'
TK-24N-U 2' x 4'