Cut Sheet

Metalux
HBI SERIES
ULTRA 47
4, 5 OR 6 T5HO LAMPS
High-Bay Industrial
Fluorescent Luminaire
Catalog #
Type
Date
Project
Comments
Prepared by
SPECIFICATION FEATURES
Construction
Full bodied steel housing with
integral ballast channel adds
strength, rigidity and structural
protection for optical assembly.
Electrical
The HBI comes standard with a
high ambient Class P electronic
ballast and twistlock lampholders.
UL/cUL listed for high ambient
environments up to 65°C
(149°F) for all lamps and ballast
combinations when used in open
uplight configurations. Suitable for
damp locations. Optional modular
power receptacle meets UL2459
and NEC 410.73 and is UL/cUL
rated for make and break under
load from outside the luminaire to
speed maintenance.
Finish
White enamel finish preceded
by a multistage cleaning cycle,
iron phosphate coating with
rust inhibitor to protect against
contaminants and oxidation.
Downlight/Uplight Optics
Die-formed, segmented optical
design optimizes performance
across three distributions.
Optical choices include a narrow
distribution for aisles, medium
distribution for assembly and
loading areas, or wide distribution
for general, open area lighting. An
uplight option is offered to permit
ceiling uniformity and allow for
ample lamp and luminaire heat
dissipation. Gasketed door frame &
lens assembly is optional for more
demanding environments.
Options
Integral Occupancy Sensor
available and provides from 600 sq.
ft. (MS) up to 1250 sq. ft. (MSO) of
coverage at a maximum mounting
height of 40' using interchangeable
lens caps provided.
Mounting
The HBI series is suited for
suspension mounting with optional
wire hook and chain set or cable
mounting. Single monopoint
mounting is available with SPM
Tong Hanger. Includes V Hangers
for rapid installation.
Warranty
When operated in high ambient
conditions, the HBI is supported
by a 5 yr/55°C and 3 yr/65°C ballast
warranty when used with a high
ambient ballast in open, uplight
configurations (T5HO lamping
only).
ADF110940
2013-01-14 07:49:41
The HBI series is an outstanding solution for high mounting height
industrial or retail applications. The HBI optic has been optimized
to provide maximum performance from T5 lamps. Optional uplight
component is provided to enable excellent ceiling uniformity. HBI‘s
high lumen package allows the benefits of fluorescent to be applied
at high mounting heights that were traditionally exclusive to HID. The
primary benefits include exceptional color rendering, high system
efficacy, 95% lumen maintenance, long lamp life, instant on/instant re-
strike, economical dimming, and uniform brightness control. Primary
applications include retail, shopping malls, light industrial, gymnasiums
and recreational environments.
DESCRIPTION
ENERGY DATA
Input Watts:
EHT Ballast
647=310W
Luminaire Efficacy Rating
LER = 81
Catalog Number: HBI-647T5-N-UPL
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $2.96
*Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements.
**Consult Pre Sales Technical Support.
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means of
disconnecting power.
4-5/16"
[109mm]
16-3/4" [427mm]
6 LAMP
7/8" [23mm] K.O.
1/2" [13mm] K.O.
4-5/16" [109mm]
16-3/4" [427mm]
Y Y
X
Y Y
X=1-1/8"
[28mm]
Y=2-13/32"
[61mm]
LAMP CONFIGURATIONS
16-3/4"
[427mm]
48-1/8" [1222mm]
2-3/8"
[59mm]
3-3/8"
[84mm]
24-3/8"
[621mm]
V-Hook Hanger
Location
Access Plate
Opening
3/8" [1
0mm]
1/4" [7mm]
7/8" K.O.
DIMENSION TOP VIEW