Instructions / Assembly
1
INSTALLATION INSTRUCTIONS
Note: This product is intended for either single mount or continuous row applications.
1. Read all instructions before starting installation.
2. This product must be installed in accordance with the applicable installation codes by
a qualified electrician familiar with the construction and operation of the product and the
hazards involved.
3. Disconnect power at circuit breaker or fuse before starting installation.
4. To avoid injury, wear gloves during installation.
5. To reduce the risk of electrical shock and product damage, do not install this luminaire
during rain or thunderstorms.
6. Do not test luminaire using an electric generator before installation.
7. Remove fastener holding access plate with screwdriver to see all fixture wiring. Remove
appropriate knockout from access plate for supply wiring. Be sure to use a grommet or
bushing (not included) to protect supply wire and cord.
8. To suspend the highbay luminaire from chains, attach the enclosed v-hooks to the holes
on the end caps. Attach the chain to a secure, stationary structure then attach one end
of chain to the v-hooks. See Figure 1
9. Attach ground wire with supply ground wire, black wire to black supply wire and white
(common) wire to white supply wire using wire nut or other connector (not included).
See Figure 2
PACKAGING CONTENTS/CONTENIDO DEL PAQUETE/CONTENU DU PAQUET
ITEMS REQUIRED WARNINGS AND CAUTIONS
(Purchase separately)
• Phillips Screw Driver
• Hammer
• Wire Strippers
• Flat head Screwdriver
• Safety Glasses & Gloves
• Ladder
• Pliers
• Bushing
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation
and maintenance of this product must be performed by a qualified
electrician. This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation
of the product and hazards involved. The light source contained in this
luminaire shall only be replaced by the manufacturer or his service agent or
a similar qualified person.
Risk of Fire and Electric Shock- Make certain power is OFF before starting
installation or attempting any maintenance. Disconnect power at fuse or
circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or
servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily
injury and property damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or
losses of any kind that may arise from the improper, careless, or negligent installation, handling or
use of this product.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
NOTICE: Ground screw provided in proper location. Do not relocate.
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable
damage on delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for
concealed damage must be filed within 15 days of delivery. All damaged material, complete with
original packing must be retained.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
ENGLISH
Instruction Manual/Instrucciones/Directives
Questions?/ Des questions?/ ¿Preguntas? 1-800-334-6871 ConsumerProducts@cooperlighting.com
A. Light fixture with lens
L’appareil d’éclairage avec lentille
Accesorio con la lente
B. (2) V-Hooks Wire Hanger
Crochets en V pour fil de suspension
Colgador de alambre V-Hooks
B. (2) Clips (39” Long)
Chaîne
Cadena
HBLAO Model
Adjustable Linear High Bay
Très grande hauteur linéaire réglable
Luminarias lineales y ajustables de montaje alto
Figure 1
Figure 1
Figure 2
GENERAL WIRING DIAGRAM