Cut Sheet

SSF Series

The SSF series standard strip incorporates a 4-1/4” channel and is available in one, two or three

lamp configuration utilizing T5, T8, and T12 lamping. Designed with our easy-to-use Flip-Up

socket design, the SSF significantly reduces installation time. The performance and

application versatility of this series can be increased by incorporating symmetrical or

asymmetrical reflectors. The SSF series is ideal for a variety of applications

including commercial, industrial, retail and residential applications.

SNF Series

The SNF series narrow strip incorporates a 2-3/4” channel and is available in a one or two lamp configuration

utilizing T5 and T8 lamps and a one lamp configuration utilizing a T12 lamp. Designed with our

easy-to-use Flip-Up socket design, the SNF significantly reduces installation time. The per-

formance and application versatility of this series can be increased by incorporating

symmetrical or asymmetrical reflectors. The small size of the SNF makes it an

ideal choice for size-restricted architectural applications.

Standard or Narrow channel

Variety of mounting methods

The new family of strips is available in two sizes, a

standard channel width of 4-1/4" in the SSF series and

a narrow channel width of 2-3/4" in the SNF series.

This choice of sizes ensures the SSF and the SNF

series can be used in a variety of applications including

areas that have size restrictions.

4-1/4"

[108mm]

2-3/4"

[70mm]

Narrow (SNF) Standard (SSF)

There are a variety of mounting options available for the SSF/SNF family

of strips including stem, cable, chain, gripper hanger, tong hanger, and

channel connector. The gripper hanger allows for easy mounting to a

T-bar grid and can be utilized for stem or surface mounting. The tong

hanger is a heavy gauge channel hanger for surface mounting. The

CLC channel hanger is a special rigid channel connector designed to

give extra support to a continuous

channel installation.

Gripper Tong Hanger Channel Hanger

PAGE 1
SSF Series The SSF series standard strip incorporates a 4-1/4” channel and is available in one, two or three lamp configuration utilizing T5, T8, and T12 lamping. Designed with our easy-to-use Flip-Up socket design, the SSF significantly reduces installation time. The performance and application versatility of this series can be increased by incorporating symmetrical or asymmetrical reflectors.
PAGE 2
T8 SSF Ordering Information for T8 S A M P L E N U M B E R : S S F - 2 3 2 - U N V- E B 8 1- U Tandem Blank=2', 3' or 4' Length 8T=8' Length Options GL=Single Element Fuse GM=Double Element Fuse EL4=Emergency Installed (4) EL8=Emergency Installed (8) Series SSF=Commercial Standard Striplite (5) Ballast Type (2) EB8 =T8 Electronic Instant Start. Total Harmonic Distortion < 10% No.