Installation Guide

INS #
Brand Logo
reversed out of
black
INS #
ADF142140
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a person
familiar with the construction and operation of the
product and the hazards involved. Cooper lighting
assumes no responsibility for claims brought about
by improper or careless installation or handling of this
product.
ATTENTION
Receiving Department: Note actual fixture description
of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly
with carrier. Claims for concealed damage must be
filed within 15 days of delivery. All damaged material,
complete with original packing must be retained.
CAUTION
Edges may cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
NOTICE
Green ground screw provided in proper location. Do not
relocate.
NOTICE
Lamps contain mercury, dispose according to local, state,
or federal laws.
NOTICE
If supply wires are located within 3 inches of ballast, use
wire rated for at least 90°C (194°F).
NOTICE
Minimum 90°c supply conductors.
Installation Instructions – Undercabinet Fluorescent Fixture
Instructions d’installation - De la lampe fluorescente sous armoire
Instrucciones de instalación de la luz fluorescente por debajo del
gabinete
R
E
N
E
W
A
B
L
E
R
E
S
O
U
R
C
E
R
E
C
Y
C
L
A
B
E
B
I
O
D
E
G
R
A
D
A
B
L
E
ote:N
1. To reduce the risk of electric fire or electric shock,
carefully follow these instructions.
2. When using electrical appliances, base precautions
should always be followed, including the following:

Read all instructions before installing the appliance.

Consult a local licensed electrician or electrical
contractor if you are not sure about the installation.

This fixture must always be used in accordance with
all electrical and safety codes and ordinances, includ-
ing the most recent National Electric Code (NEC) and
with the occupational Safety and health administration
(OSHA) Volume 1 on General Industry Standards and
Interpretations.

Always make certain that the power source conforms
to the requirements on the fixture.

Risk of fire or electric shock. Do not disassemble
fixture. The fixture does not have any user serviceable
parts.