Instruction manual

instructions. Both the Windows driver and Metapace Label Designer are

available on the Printer Accessory CD, also available for download from:

www.matapace.com

Note: If you need to update the driver, please remove any old versions

of the driver before continuing.

Chapter 3 Maintenance

Warning:

1. Make sure the printer is turned OFF before performing any

maintenance operations.

2. The printhead becomes hot while printing, be careful when

performing maintenance on the printhead.

3. Use only the cleaning agents indicated. Metapace will not be

responsible for damage caused by any other cleaning materials

used on the printer.

4. Anhydrous isopropyl alcohol is a solvent containing no more

than one percent water. Isopropyl alcohol is a flammable

solvent; always take the proper precautions when using this

solvent.

Cleaning the Printhead

The printhead is easily damaged due to its precision construction. A

printhead damaged by misuse is not covered under the terms of the

warranty. To ensure longevity of the printhead, please note the

following:

1. Always use proper cleaning materials and techniques to clean the