Instruction manual

3
Chapter 1 Introduction
Specifications
Model
METAPACE
L-3᧤200dpi᧥
METAPACE
L-3᧤300dpi᧥
METAPACE
L-3᧤600dpi᧥
Printing method Direct thermal & Thermal transfer
Printing resolution
203 dpi
(8 dots/mm)
300 dpi
(11.8 dots/mm)
600 dpi
(23.6dots/mm)
Max printing speed
8 ips
(203.2 mm/s)
8 ips
(203.2 mm/s)
4 ips
(101.6 mm/s)
Max printing width
4.09ೀ
(104 mm)
4.16″
(105.7 mm)
4.16″
(105.6 mm)
Max printing length
157″
(4000 mm)
79″
(2000 mm)
39″
(1000 mm)
CPU/Memory
32-bit ARM Processor
4 MB FLASH ROM, 8 MB SDRAM
Media
Width: 4.56″(116 mm) max, 0.79" (20 mm) min.
Total thickness (including liner, if any):
0.0024″(0.06 mm)~ 0.012″(0.305 mm).
Supply roll: OD8″(203.2 mm) max.
ID 1.5″(38 mm) min.
Ribbon
Max width: 4.65″(118 mm).
Max length: 1968ಿ(600 m).
Ink side: both In and Out.
Ribbon roll: OD3.3″(84 mm) max..
ID1″(25.4 mm) min.
Media sensor
Reflective/Transmissive᧤Adjustable᧥