User manual

3
Update
Introduction
SETTING UP THE CRADLE
Capable of charging Metapace S-22, the cradle is specifically designed for the scanner to
communicate with a host computer wirelessly. The connection between the scanner and
the cradle is made easy and reliable. Refer to
3.1.1 Connect to the Cradle. The cradle is
also an Auto-Sense stand when used with the scanner set to Auto-Sense mode.
The table below describes the status of the power and communication LED indicators of
the cradle.
Power LED Indicator
Meaning
Red,
solid
--- Power ON
--- --- Power OFF
Communication LED
Indicator
Meaning
--- Blue,
solid
Initialize
Red,
solid
--- Failed to establish a USB connection
Red,
solid
Blue,
flashing
Serial command mode with USB Virtual COM or RS-232: wait 3 seconds for
starting a serial command
Red,
flashing
Blue,
flashing
Serial command mode with USB HID: wait 3 seconds for pressing [Num
Lock] or [Caps Lock] 5 times via keyboard