Hardware manual

3
Update
Introduction
SETTING UP THE CRADLE
Capable of charging the Metapace S-2 scanner, the cradle is specifically designed for the
scanner to communicate with a host computer wirelessly. The connection between the
Metapace S-2 scanner and the cradle is made easy and reliable. Refer to
3.1.1 Connect
to the Cradle
. The cradle is also for use with the scanner when set to Auto-Sense mode.
Two LED indicators are provided for communications status and battery charging status.
Power LED
Meaning
Red,
solid
Power ON
--- Power OFF
Communication LED Meaning
--- Blue,
solid
Initialize
Red,
solid
--- Failed to establish a USB connection
Red,
solid
Blue,
flashing
Serial command mode with USB Virtual COM or RS-232: wait 3 seconds for
starting a serial command
Red,
flashing
Blue,
flashing
Serial command mode with USB HID: wait 3 seconds for pressing [Num
Lock] or [Caps Lock] 5 times via keyboard
--- Blue,
flashing
Wait for connection request from the scanner (Slow flash at 0.5 Hz)