Datasheet

DX-250 / 350 Digital Dispensers
62
The DX-250 Series is a high
performance Digital
Dispenser. Complete with a
range of accessories, the
micro-air dispensing system
unites affordability with high
accuracy and repeatability for
exceptional results.
These user friendly fluid
dispensing systems include a
digital timer with a rotary control time knob for easy setup
and a vacuum suck-back control for all viscosities of
fluids.
Key Features & Benefits
w Small footprint and lightweight
w Economical dispenser
w Highly accurate and repeatable micro-air dispensing
w Digital timer and vacuum controls
w Available in two versions of operating pressure: 0 to
100 psi for general applications, and 0 to 15 psi for
specific low viscosity applications
w Packaged ready to use with a universal power supply,
foot switch, air hose, sample tips, syringe barrels and
adapter.
w I/O Interface for robotic applications
Technical Specifications
Size (W x L x H) 152mm x 165mm x 178mm (6" x 6.5" x 7")
Weight 1.2Kg (2.6 lb)
Cycle Rate 600 cycle/minute
Timing Range 0.020 to 60.000 seconds
Timing Tolerances +/- 0.001%
Input Voltage 100-240 VAC
Input Frequency 50-60 Hz
Cycle Mode TIMED, PURGE
I/O Interface Initiated by voltage or contact closure
Certification CE, TUV-GS, NRTL
Warranty 1 year
Part No. Description
DX-250 Digital Dispenser 0 to 100 psi (0 to 6.9 bar)
DX-255 Digital Dispenser 0 to 15 psi (0 to 1.0 bar)
The DX-350 Series is a
microprocessor-driven and fully
digital Dispenser. Intuitive to use,
the DX-350 dispenses low,
medium and high-viscosity fluids
accurately and consistently.
The firmware provides the option
of programming up to 10 varied,
sequenced or individual shots.
The DX-350 includes an adjustable vacuum-driven “suck-
back” to control material “tailing” and waste.
Key Features & Benefits
w Small footprint and lightweight
w 10 programmable dispense routines and 4 operating
modes
w Digital timer, pressure and vacuum read-outs
w Accurate reproduction of sequences of beads or dots
w Adjustable vacuum suck back feature for controlling
drips of fluid between dispense cycles
w Available in two versions of operating pressure: 0 to
100 psi for general applications, and 0 to 15 psi for
specific low viscosity applications
w Packaged ready to use with a universal power supply,
foot switch, air hose, sample tips, syringe barrels and
adapter
w I/O Interface for robotic applications
Technical Specifications
Size (W x L x H) 152mm x 165mm x 178mm (6" x 6.5" x 7")
Weight 1.2Kg (2.6 lb)
Cycle Rate 1200 cycle/minute
Timing Range 0.008 to 60.000 seconds
Timing Tolerances +/- 0.001%
Input Voltage 100-240 VAC
Input Frequency 50-60 Hz
Memories 10 programmable
Cycle Mode TIMED, INTERRUPT, TEACH, PURGE
I/O Interface Initiated by voltage or contact closure
Certification CE, TUV-GS, NRTL
Warranty 1 year
Part No. Description
DX-350 Digital Dispenser 0 to 100 psi (0 to 6.9 bar)
DX-355 Digital Dispenser 0 to 15 psi (0 to 1.0 bar)
DX-250 Series Digital Dispenser DX-350 Series Digital Dispenser
www.metcal.com