Datasheet

PS-900 Production Soldering
27
PS-900-Solar
Key Features &Benefits
w Superior photo voltaic tabbing and buss soldering
w SmartHeat reduces thermal stress on solar cells
w Reduces the likelihood of micro-cracking
w Produces a controlled, high quality solder joint
w Calibration-free system
w Specially designed STV-DRH440A hoof tip for high performance
Part No. Includes
PS-900-Solar PS-PW900 Power Supply, PS-900-PC9 Hand-piece
with long cord (274cm / 9ft) & PS-CA3 Coil Assembly,
STV-DRH440A soldering tip, WS2-NS Workstand,
AC-CP2 tip removal pad
Tip Soldering Hand-Piece with
PS-CA3 Coil Assembly
Technical Specifications
Power Supply
Ambient Operating Temperature 10 - 40°C
Maximum Enclosure Temperature 65°C
Input Line Voltage 100 - 240 VAC
Power Consumption 90 Watts max.
Input Line Frequency 50/60 Hz *
Output Power 60 Watts max.*
Output Frequency 450 KHz
Power Cord (3-wire) 183 cm 18/3 SJT
Dimensions W x D x H 80 x 160 x 115 mm (3.1" x 6.3" x 4.5")
* RF SmartHeat Technology provides greater power. More details at www.metcal.com/smartheat
Soldering Handle and Coil Assembly
Tip-to-Ground Potential < 2 mV
Tip-to-Ground Resistance < 2 ohms
Idle Temperature Repeatability ± 1.1°C in still air
Handle Cord Assembly Length 122 cm – burn proof, ESD safe
Connector 3-pin power connector
Overall length (with tip) 230 mm (9.06") with standard tips
Grip diameter 13 mm (0.51")
Tip to grip 58 mm (2.28")
Tip shaft diameter 8.0 mm (0.31")
Tip length 82 mm (3.23") to 93 mm (3.66") (typical)
Workstand W x D x H 105 x 175 x 90 mm (4.1" x 6.9" x 3.5")
SxV
Soldering Tips
Full range on pages 28-29
STV-DRH440A
Hoof Tip 4mm (.157”)
0.187 "
4.75mm
0.52 "
13.2mm
0.157 "
4mm
www.metcal.com