User Manual

1) Select BANK to run SCENES using MIDI – in MANUAL /
Auto or MUSIC Run Mode.
3 RUNNING CHASES:
MANUAL RUN CHASES:
This function will enable you to manually step through a
selected CHASE.
1) Press and HOLD the PROGRAM Button for three (3)
seconds to enter the Programming Mode.
2) Start a CHASE by selecting one of the six (6) CHASE
Buttons.
3) Press the TAP SYNC Button. Each time you press the
button, you will step through the CHASE.
4) Use the BANK Select Button to scroll through the
CHASES.
5) Press and HOLD the PROGRAM Button for three (3)
seconds to exit the Programming Mode
3 RUNNING CHASES:
AUTO RUN CHASES:
1) Press ANY or all of the 6 CHASE Buttons to select the
desired CHASE.
2) Press and Release the AUTO / Del. Button. The
corresponding LED will flash.
3) Adjust the FADE Time and SPEED to your desired setting.
The
CHASE
will run according to your settings.
4) You can override the Speed and Fade time by tapping the
TAP SYNC / Display button three (3) times. Then the
CHASE will be run based on the time interval of your taps.
NOTE A: Never adjust the FADE TIME slower then the SPEED
setting. Otherwise your CHASES will not be completed
before a new SCENE is sent
NOTE B: If you wish to include all the CHASES, Press AUTO /
Del. before selecting a CHASE.
3 RUNNING CHASES:
MUSIC RUN CHASES:
1) Press one of the six (6) CHASE Buttons to select the
CHASE desired.
Press and Release the MUSIC / Bank-Copy Button
2) The corresponding LED will FLASH in the LCD.
3) The CHASE will now run via the Sound / Music.
NOTE: When you exit a CHASE by Pressing the CHASE
Button, the Controller will automatically run the
SCENES that are in the last bank accessed.
To stop the movements of the light, either use the
BLACKOUT button or Press MUSIC if in the Music
Mode or in the AUTO Mode.
3 MIDI CHANNEL SETTING
MIDI RUNNING
1) Press and HOLD the MIDI / Add Button. The third and
Fourth digits on the LCD display will FLASH – indicating
MIDI Mode.
2) Use the UP or Down Buttons to select the Midi channel
(1 – 16) you would like to use / run.
3) Press and Hold the MIDI / Add Button once more to end
MIDI mode
3
MIDI CHANNEL SETTING
NOTE “ON”: RECEIVE NOTE “ON” SIGNALS TO EXECUTE
CORRESPONDING FUNCTIONS
THE SCENEMASTER RECIEVES ONLY MIDI
NOTES AND YOU MIGHT WANT TO
TRANSPOSE YOUR KEYBOARD TO FIND
THE PROPER MIDI NOTE.
ASSIGNING PAN & TILT CHANNELS TO THE
JOYSTICK
1) Press “Program” button for 2 seconds to enter Program
Mode (LED flashes). Turn off BLACKOUT LED
2) Press “FINE + MODE, (together- twice) it will Display SET
00 00 Up FI CH
3) Press SCANNER Button, to select fixture assigning
4) Adjust the slider on SPEED to Channel 1
5) Adjust the slider on FADE TIME to X (almost to the top).
6) Press Midi/Record (one button) to confirm the PAN on
Ch.1
7) Adjust the slider on SPEED to channel 2 (or whatever)
8) Adjust the FADE SLIDER to read Y
Finished – Press FINE + MODE to exit