User Manual

4
USER MANUAL:
ProMover 250
DMX-Scanner - Yoke Fixture
Keep this manual for future needs! Put it in a place that you can access it if needed.
Table of contents:
INTRODUCTION: ………………………………….…………… 1
SAFETY INSTRUCTIONS: ……………………………
1
OPERATING DETERMINATIONS: …………………. 2
USER MANUAL INSTRUCTIONS: …………………. 3
DESCRIPTION OF THE DEVICE: ……………………………
FEATURES: ……………………………………………. 4
OVERVIEW
INSTALLATION : ………………………………………………. 5
Installing/Replacing the lamp: …………………………. 5
Lamp adjustment: ……………………………………….. 5
Overhead Rigging:……………………………………….. 5
Master/Slave operation : ………………………………... 6
DMX-512 connection / connection between Fixtures: .. 7
Connection with the mains: …………………………….. 7
OPERATION
............................................................………
Stand Alone operation................................................ 7
DMX-controlled operation ..............................…........ 7
Addressing .................................................................. 7
DMX-Protocol.............................................................……… 8
ProMover 250 – channel features: ……………………. 9
Setting DMX Channel / Stand-alone LCD: …………… 10
CLEANING AND MAINTENANCE: ....................................... 10
Replacing the fuse ....................................................... 11
TECHNICAL SPECIFICATIONS:
Power supply: 115 V AC, 60 Hz ~ 500 W 6
Power consumption: 6 amp
DMX-control-channels: 11
DMX-512-connection: 3-pin XLR
Sound-control: via built-in microphone
Flash-rate: (1-10 flashes/sec.) via shutter
Number of colors: 7 dichroic + white +RAINBOW effect
Number of gobos: 7 rotating gobos and open + rainbow scrolling
Dimensions: 16L x 13w x 20h (525 x 300 x 150 mm)
Weight: 52 lbs. (24kg). Boxed weight: 61lbs
Maximum ambient temperature ta: 45° C
Maximum housing temperature tB (steady state): 60° C
Min. distance from flammable surfaces: 0.5 m
Min. distance to lighted object: 0.5 m
Fuse: 7amp
Fitting lamps: MSD 250