Operations Manual

OPERATIONS 4-41
O&M of the MCC-545B PACKET DATA RADIO
12/2000
*BRATE,rate Set transmit bit rate in kilobits per second. There is a
low or high rate setting; effective rate at either setting is
based on the componentry installed in the bit clock
generator.
rate = 4K/4.8K or
8K/4K
CANMSG,nnnn (,msg
length {,min queue depth})
Automatically generate a message of specified length
that repeats until turned off with CANMSG OFF
command. You can compose the message by entering
only the destination name (not message length or
minimum queue depth). Destination node must be a
neighbor node. CANMSG cannot contain more than 25
messages in its queue. If the number of canned message
in queue falls below minimum queue depth, additional
canned messages will be injected.
nnnn = Station ID
Master = 1 –
4095
Remote = 256 –
4095
msg length =
number of
characters in
message
min queue depth
= min. # of
canned messages
in queue
1 – 4095
1 – 3000
0 – 25
CANMSG MODE
{,mode)
Set reception of canned message to two of the following
states:
PRINT – print all messages
NO PRINT – does not print messages
mode = PRINT
NO
PRINT
CANMSG OFF,nnnn Turn canned message mode off nnnn = Station ID
Master = 1 – 245
Remote = 256 -
4095
1 – 4095
*CHECKIN{,ii} Select check-in interval in seconds ii = interval
1 – 65535
CLEAR
MAINTENANCE
MONITOR
Clear monitor Station