User Manual MW06 Version 1.
ProductOverview 2
Introduction Key Features ・Supports IEEE802.11ac/a/b/g/n wireless standards ・Four 2.4 GHz Metal PIFA Antennas ・Four 5 GHz Metal PIFA Antennas ・One Metal PIFA Antenna for scanning radio ・Support Wave 2 MU-MIMO function ・Support Tx Beamforming to enlarge the transmitting distance. ・Support Scanning Radio, 2.4Ghz/5Ghz selectable ・IEEE802.11 PoE af Input design with Gigabit port supports. ・Flexible application by the built-in 2nd LAN port. ・More customized items on Band Steering for intelligent Management.
Physical Interface (MW06) 2.4GHz:3.29dBi; 5GHz:5.
Physical & Environment Power Source DC Input: 12 VDC/2A PoE: compatible with 802.3af/at 54Vdc/0.6A Internal High Gain Antenna ~3.29dBi 2.4GHz antennas (Peak Gain) ~5.84dBi 5GHz antennas 1 x 10/100/1000Mbps Ethernet Port with 802.
Applications Wireless LAN (WLAN) products are easy to install and highly efficient. The following list describes some of the many applications made possible through the power and flexibility of WLANs: Difficult-to-Wire Environments: There are many situations where wires cannot be installed, deployed easily, or cannot be hidden from view.
FCC statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
