User Manual

(3) Long press the OK button: prompt to restart the calculation of the minimum,
maximum, and average values of voltage, current, and power.
(4) Long press the right button: enter the offline curve observation page (please see
the follow-up instructions).
6.0.3 Fast charge recognition page
Description
The top row of data from left to right is the boot record time and the onboard
temperature respectively;
The uppercase data on the left is voltage, current, and power from top to bottom;
From top to bottom on the right are:
1. The trigger time limit is the setting menu->trigger->trigger time value.
2. The percentage of remaining trigger time.
3. Trigger status.
4. Trigger type
The trigger timing is the timing of the trigger time. When the timing reaches the
trigger time limit, the meter will stop triggering.
It should be noted that the charger will restart after some protocols stop triggering.
The bottom table shows the D+/D- voltages and the identified possible ongoing
agreements.
Instructions
11