User Manual
Table Of Contents
- 0.0 version and updates
- 1.0 Overiew
- 2.0 pay attention to safety matters
- 3.0 Performance description
- 4.0 Appearance structure
- 5.0 Technical Specifications
- 6.0 Main Page
- 7.0 Expansion of recording function
- 8.0 Quick charge protocol trigger and detection menu
- 9.0 Charging tool
- 10.0 setting menu
- 10.1 Settings menu -> General
- 10.1.1 Setting menu -> General -> Display brightness
- 10.1.2 Settings menu->General->Standby brightness
- 10.1.3 Settings menu->General->Standby time
- 10.1.4 Settings menu->General->Data transmission
- 10.1.5 Setting menu->General->Temperature symbol
- 10.1.6 Settings menu -> General -> System language
- 10.1.7 Settings menu -> General -> Current change wake up
- 10.1.8 Settings menu->General->Bluetooth switch
- 10.1.9 Settings menu -> General -> Gravity direction recognition
- 10.1.10 Settings menu->General->Startup page
- 10.1.11 Settings menu->General->Restore factory settings
- 10.2 Settings menu -> record
- 10.3 Settings menu -> trigger
- 10.4 Settings menu -> system
- 10.1 Settings menu -> General
- 11.0 Upgrade firmware instructions (NOTEļ¼The previous FNB38 and FNB48 use the FNIRSI USB Meter upgrade tool.FNIRSI-C1 uses FNIRSI UsbMeter Computer Software to upgrade the firmware now.)
- 12.0 Frequently Asked Questions
Instructions
(1) Long press the left button: time base subtraction.
(2) Click the OK button: start/pause drawing the curve. (Except in mode 3, it will
prompt whether to clear the curve).
(3) Long press OK key: switch mode.
(4) Long press the right button: time base plus.
7.0 Expansion of recording function
7.0.1 Energy Statistics List
Description
In the record page (6.0.2) long press the left button to enter. Each row in the list
represents a group of parameters, from left to right are the group number, capacity,
and energy. The selected group is displayed in green, the lower left corner is the
statistical time of the selected group, and the lower right corner is the group number
of the currently statistical group.
Instructions
(1) Click the OK button: prompt to select or clear the selection group.\
13