User Manual
Table Of Contents
- 0.0 version and updates
- 1.0 Overiew
- 2.0 pay attention to safety matters
- 3.0 Performance description
- 4.0 Appearance structure
- 5.0 Technical Specifications
- 6.0 Main Page
- 7.0 Expansion of recording function
- 8.0 Quick charge protocol trigger and detection menu
- 9.0 Charging tool
- 10.0 setting menu
- 10.1 Settings menu -> General
- 10.1.1 Setting menu -> General -> Display brightness
- 10.1.2 Settings menu->General->Standby brightness
- 10.1.3 Settings menu->General->Standby time
- 10.1.4 Settings menu->General->Data transmission
- 10.1.5 Setting menu->General->Temperature symbol
- 10.1.6 Settings menu -> General -> System language
- 10.1.7 Settings menu -> General -> Current change wake up
- 10.1.8 Settings menu->General->Bluetooth switch
- 10.1.9 Settings menu -> General -> Gravity direction recognition
- 10.1.10 Settings menu->General->Startup page
- 10.1.11 Settings menu->General->Restore factory settings
- 10.2 Settings menu -> record
- 10.3 Settings menu -> trigger
- 10.4 Settings menu -> system
- 10.1 Settings menu -> General
- 11.0 Upgrade firmware instructions (NOTEļ¼The previous FNB38 and FNB48 use the FNIRSI USB Meter upgrade tool.FNIRSI-C1 uses FNIRSI UsbMeter Computer Software to upgrade the firmware now.)
- 12.0 Frequently Asked Questions
The operation mode is the same as QC3.0 trigger.
8.0.6 Samsung AFC Trigger
The operation mode is the same as QC2.0 trigger.
8.0.7 PD protocol trigger
Take the picture as an example. The picture shows a charger sending a message
with a total of 6 gears, among which gears 1, 2, 3, 4, and 5 are fixed voltage gears,
and gear 6 is adjustable voltage gear (PPS).
When the dot on the left is on Gear, you can switch the gear by pressing the left
and right keys. When the gear is switched to the PPS gear, you can switch the step
voltage by clicking the middle button. After selecting the step voltage, press the left
17