User Manual
Table Of Contents
- 0.0 version and updates
- 1.0 Overiew
- 2.0 pay attention to safety matters
- 3.0 Performance description
- 4.0 Appearance structure
- 5.0 Technical Specifications
- 6.0 Main Page
- 7.0 Expansion of recording function
- 8.0 Quick charge protocol trigger and detection menu
- 9.0 Charging tool
- 10.0 setting menu
- 10.1 Settings menu -> General
- 10.1.1 Setting menu -> General -> Display brightness
- 10.1.2 Settings menu->General->Standby brightness
- 10.1.3 Settings menu->General->Standby time
- 10.1.4 Settings menu->General->Data transmission
- 10.1.5 Setting menu->General->Temperature symbol
- 10.1.6 Settings menu -> General -> System language
- 10.1.7 Settings menu -> General -> Current change wake up
- 10.1.8 Settings menu->General->Bluetooth switch
- 10.1.9 Settings menu -> General -> Gravity direction recognition
- 10.1.10 Settings menu->General->Startup page
- 10.1.11 Settings menu->General->Restore factory settings
- 10.2 Settings menu -> record
- 10.3 Settings menu -> trigger
- 10.4 Settings menu -> system
- 10.1 Settings menu -> General
- 11.0 Upgrade firmware instructions (NOTEļ¼The previous FNB38 and FNB48 use the FNIRSI USB Meter upgrade tool.FNIRSI-C1 uses FNIRSI UsbMeter Computer Software to upgrade the firmware now.)
- 12.0 Frequently Asked Questions
and right keys (left Decrease right plus), decrease/increase the voltage.
9.0 Charging tool
On the (6.0.3) fast charge recognition page, long-press the right button to enter the
charging tool menu. The functions are:
1 PD listener.
2 Read the E-Marker cable.
3 wire resistance measurement.
4 Apple 2.4A acceleration.
9.0.1 PD Listener
When using a PD monitor, use a power supply not greater than 16V (usually 5V)
and a Micro-USB cable to connect to the PC connection terminal, provide external
power.
When the connection is normal and the PD protocol triggered by the PD consumer
is captured, the page is shown as follows.
In the figure above, the charger is a 105W PD charging head. The current PD
consumer selects the 5th gear and triggers the target voltage of 20V,the maximum
current is 5A.
18