User Manual
Table Of Contents
- 0.0 version and updates
- 1.0 Overiew
- 2.0 pay attention to safety matters
- 3.0 Performance description
- 4.0 Appearance structure
- 5.0 Technical Specifications
- 6.0 Main Page
- 7.0 Expansion of recording function
- 8.0 Quick charge protocol trigger and detection menu
- 9.0 Charging tool
- 10.0 setting menu
- 10.1 Settings menu -> General
- 10.1.1 Setting menu -> General -> Display brightness
- 10.1.2 Settings menu->General->Standby brightness
- 10.1.3 Settings menu->General->Standby time
- 10.1.4 Settings menu->General->Data transmission
- 10.1.5 Setting menu->General->Temperature symbol
- 10.1.6 Settings menu -> General -> System language
- 10.1.7 Settings menu -> General -> Current change wake up
- 10.1.8 Settings menu->General->Bluetooth switch
- 10.1.9 Settings menu -> General -> Gravity direction recognition
- 10.1.10 Settings menu->General->Startup page
- 10.1.11 Settings menu->General->Restore factory settings
- 10.2 Settings menu -> record
- 10.3 Settings menu -> trigger
- 10.4 Settings menu -> system
- 10.1 Settings menu -> General
- 11.0 Upgrade firmware instructions (NOTE：The previous FNB38 and FNB48 use the FNIRSI USB Meter upgrade tool.FNIRSI-C1 uses FNIRSI UsbMeter Computer Software to upgrade the firmware now.)
- 12.0 Frequently Asked Questions
2 When the meter is off, press the "OK" button fisrt.Then connect the USB data
cable to the "PC online port".And it will display the connected, device model, and
device firmware version.
3 Click “System”, In the location of the file, import the firmware version you want to
upgrade.
4 Click “Refresh icon”，START to start the firmware upgrade. After the upgrade is
complete, the watch will automatically restart and enter the main interface.
12.0 Frequently Asked Questions
1 Q: Why is there no response when C1 is inserted into the PD charger?
A: The CC pull-down of C1 is off by default, and the PD charging head does not
supply power when the CC pull-down is not detected. After you can connect to C1,
press AND HOLD the right button，you can use the CC pull-down to open the way
to make the charger work.
2 Q: Use the CC cable to connect to C1 from the TYPE-C female socket, and
press the right button, why there is still no response?
A: The CC line has only one-sided CC, and the connector can be turned over and
reconnected.
3 Q: How to trigger the PD protocol?
A: If you start by pressing the right button, after entering the PD trigger, no
protocol information is displayed, you need to re-plug and enter.
3 Q: After triggering SCP or PD, and then triggering other protocols, will it restart?
A: This is the reason for the agreement, which is normal.
4 Q: After the SCP or PD is released, if another protocol is triggered, it will restart?
A: This is the reason for the agreement, which is normal.
25