User Manual

Table Of Contents

0.0 version and updates

As the instrument has many functions and frequent software and

hardware updates, the manual may be updated at any time, please be

aware. Please get the latest update information on the official website.

1.0 Overiew

The C1 TYPE-C tester is a high-reliability, high-safety USB voltage and current

detection meter and a mobile communication terminal fast charging trigger. It has a

1.3-inch TFT LCD display with 240x240 ultra-high pixels. Use external 16-bit ADC,

PD protocol physical chip. It can be used to measure the power supply or power

consumption of products such as USB interfaces, mobile phone chargers, U disks,

etc.;It can be used to measure mobile phone charging power and mobile power input

and output conditions; it can be used to test charger fast charging protocols.

This instruction manual includes relevant safety information, warning tips and

solutions to common abnormal situations. Please read the relevant content carefully

and strictly abide by all warnings and precautions.

2.0 pay attention to safety matters

1 Do not connect the monitoring interface to a power supply exceeding 24V;

2 Do not connect the PC connection port to a power source exceeding 16V;

3 When using the fast charge trigger module, please do not connect equipment that

cannot withstand high voltage to any monitoring interface;

4 When working with high power, the temperature of the instrument rises, please be

careful to prevent burns;

5 Please do not charge the phone after the fast charge is triggered. Therefore, the

manufacturer is not responsible for damage to the phone.