Application Guide

General operating instructions
1. Confirm that the switch is in the off position and then plug the plug
into the power source.
2. Turn on the power switch to “I”.
3. Do not apply excessive force during sanding, and need to sand the
grain along the grain direction and sandpaper with sandpaper. It is
necessary to ensure uniform pressure on the workpiece during
operation.
4. Regularly check the sandpaper for wear and replace the sandpaper as
needed. Note: Always turn off the power and unplug the plug when
replacing the sandpaper.
5. When the sanding is complete, the sander needs to be removed from
the workpiece and the power is turned off.
6. When using the sander, clean all wood chips and dust with a vacuum
cleaner and wipe with a clean, soft cloth.
7. To avoid accidents, turn off the power and pull the plug out after use.
Clean the sander and keep it out of reach of children indoors.