MT100 Temperature Monitoring Series Operation and Installation Manual
A1-MT100 [Manufacturer]: Wuhan Huchuang Union Technology Co., Ltd. [Production Address]: No.1 Workshop, 1F, Building B10, Wuhan Hi-Tech Medical Device Park, No. 818 Gaoxin Avenue, East Lake Hi-Tech Development Zone, Wuhan, Hubei, China [After-Sales Service Unit]: Wuhan Huchuang Union Technology Co., Ltd.
A1-MT100 Contents 1 Overview .................................................................................................................................................................3 1.1 Operation Instructions of Manual .................................................................................................................3 1.2 Overview ......................................................................................................................................................3 1.
A1-MT100 1 Overview 1.1 Operation Instructions of Manual 1.1.1 It is not allowed to print or disclose any content of this Manual, including pictures and audio products, under any name without the consent of Huchuang Union; 1.1.2 The equipment operator may copy some sections of this Operation Manual for internal use only, such as for instructing the user how to deal with emergencies. These sections are clearly listed in the catalogue of this manual; 1.1.3 Wuhan Huchuang Union Technology Co., Ltd.
A1-MT100 incubator temperature is abnormal. 1.3 Environmental Requirements 1.3.1 Only for indoor use, no high temperature, moisture, water or dust; 1.3.2 Atmospheric pressure: 70kPa～105kPa; 1.3.3 Working ambient temperature: 0℃～+50℃; 1.3.4 Storage ambient temperature: 0℃～+50℃; 1.3.5 Relative humidity in the working environment: ≤80% (non-condensing); 1.3.6 No metal objects around the equipment (Keep it away from metal wall). 1.4 Environmental Protection Instructions 1.4.
A1-MT100 2.1 a) Structure Features MT100； Dish tray b) Equipment SN； SN MT100 Bottom 2.2 Equipment Parameters Table 2 Equipment Parameters Item Parameter Overall dimensions 38.5mm × 38.
A1-MT100 Storage temperature 0℃～50℃ Operating temperature 0℃～50℃ Resolution Temperature measurement error 0.01℃ ±0.5℃(0℃ ~ +15.0℃) ±0.3℃(+15.0℃ ~ +35.8℃) ±0.2℃(+35.8℃ ~ +37.0℃) ±0.1℃(+37.0℃ ~ +39.0℃) ±0.2℃(+39.0℃ ~ +41.0℃) ±0.3℃(+41.0℃ ~ +45.0℃) ±0.5℃(+45.0℃ ~ +50.
A1-MT100 After MT100 and MT500 devices are installed normally, users can download the "Laboratory Monitoring System" APP to view the temperature data tested; or view the temperature data through the computer web version. 4 Installation Instructions 4.1 Installation Method 1. Unscrew the top cover of the equipment, and remove the insulating strip on the top of the button battery; 2. Tighten the top cover of the equipment, sterilize it, and put it into the incubator to be tested; Dish tray 4.
A1-MT100 signal of the device; The temperature sensing area is located in the center of the equipment base, and this 2 part should fit the test area during installation; Press Reset button to reset the whole system; because the device is an ultra-low power consumption device, it is usually in sleep state; if you want to use the serial 3 port or wireless function to modify parameters, do so within the first 30 seconds of resetting the device; otherwise, the operation will fail; Pay attention to the positi
A1-MT100 environment to prevent battery damage; Pay attention to the location of the equipment and try to place the equipment away from metal wall or metal objects as far as possible for fear that the transmission of signals is affected; 6 MT100 is not waterproof, so the equipment shall not directly contact with liquid water; FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules.
A1-MT100 -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Wuhan Huchuang United Technology Co., Ltd. Address: No.1 Workshop, 1F, Building B10, Wuhan Hi-Tech Medical Device Park, No.
