Instruction manual

making coffee

The X7 machine is designed to function exclusively with “Metodo Iperespresso” capsules

Dosing is performed automatically by the machine

To change the quantity of coffee in the cup and set a new value, press the coffee switch until you have obtained the desired quantity,

then release the switch

If you prefer to not use the automatic shut off for the coffee extraction, or if you prefer to change the time of extraction from the one

pre-set at the factory, it is possible to disable this function

Follow the instructions outlined previously, keeping the coffee button pressed until the machine stops the water flow, then release the button

To reset the automatic shut off again, follow the instructions in this manual

The automatic shut off function can be avoided by pressing the coffee button 5 for more than 3 seconds; to stop the extraction you

must press button 5 again

Check that the coffee switch is lit up

Twist the capsule holder, insert a capsule , re-position the capsule holder in the brewing unit and twist it to the right until it is locked in

place